Comparative study of shell-and-tube heat exchangers versus gasketed-plate heat exchangers

Download
116153.pdf
2001
Binicioğulları, Dilek
Show full item record
293
views
32
downloads
https://hdl.handle.net/11511/12224
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Comparative Study on Energy Efficiency of WSNs and WMSNs for Surveillance Applications
Kizilkaya, Burak; Ever, Enver; Yazıcı, Adnan (2019-01-01)
The infrastructure required to deliver various "Internet of Things" (IoT) services is expected to be widely available in the very near future for application areas such as Smart Cities, Smart Homes, Intelligent Transportation and Smart Monitoring in the coming decades. In fact, it is expected that the number of devices connected to the Internet will exceed 50 billion by 2020. It is possible to use these infrastructures for environmental monitoring systems, especially for the early detection and prevention o...
Comparative study of an RC chimney as per different codes
Bashir, Ishfaq; Canbay, Erdem; Department of Civil Engineering (2019)
Almost all the industrial reinforced Industrial concrete chimneys are tall and slender structures having circular cross-sections. Analysis and design of such structures require dynamic analysis for seismic loads, the pressure resulting from wind and for loads due to self- weight of the structure. Under a given lateral dynamic load, the exact geometry of a RC chimneys plays an important role in the structural behavior. Stiffness parameters of RC chimneys significantly depend on the geometric properties of th...
COMPARATIVE STUDY OF POST-BUCKLING LOAD REDISTRIBUTION IN STIFFENED AIRCRAFT PANEL WITH AND WITHOUT MATERIAL NONLINEARITY
AYDIN, ENES; Kayran, Altan (2018-11-15)
In this article, a comparative study is presented on the post buckling load redistribution in stiffened aircraft panels modeled with and without material nonlinearity. In the first part of the study, a baseline stiffened panel is generated for further investigation of the material nonlinearity on the post-buckling behavior and on the effective width of the stiffened panel. In this respect, a stiffener section which provides classical clamped edge condition is designed by matching the compression buckling co...
Comparative Study of the Mechanical Properties of Fiber-Reinforced Denture Base Resin
KÖROĞLU, AYŞEGÜL; Ozdemir, Tonguc; Usanmaz, Ali (Wiley, 2009-07-15)
Poly(methyl methacrylate) (PMMA) is used for removable prostheses. However, PMMA denture base resin does not meet all the mechanical requirements of prostheses. The aim of this in vitro study was to compare the transverse strength, modulus of elasticity, and impact strength values of nonreinforced heat-polymerized and microwave-polymerized denture base resin with those of denture base resin reinforced with continuous unidirectional E-glass, woven E-glass, and ultrahigh-molecular-weight polyethylene fibers. ...
Comparative Study on the Effect of Number of Girders on Live Load Distribution in Integral Abutment and Simply Supported Bridge Girders
Yalcin, O. Fatih; Dicleli, Murat (SAGE Publications, 2013-06-01)
In this study, the effect of the number of prestressed concrete girders on the distribution of live load effects among the girders of integral abutment bridges (IABs) and simply supported bridges (SSBs) is investigated. For this purpose, two and three dimensional finite element models (FEMs) of several single-span IABs and SSBs are built and analyzed. In the analyses, bridges with various superstructure properties, such as span length, girder type and size, slab thickness are considered. The finite element ...
Citation Formats
D. Binicioğulları, “Comparative study of shell-and-tube heat exchangers versus gasketed-plate heat exchangers,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr