Simultaneous hot and cold forging of hollow workpieces.

Download
119264.pdf
2002
Kurt, Ahmet
Show full item record
60
views
0
downloads
https://hdl.handle.net/11511/12610
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Simultaneous hot and cold forging of solid cylinders
Kayatürk, Kürşad; Tekkaya, A. Erman; Department of Mechanical Engineering (2003)
Simultaneous production of tert-Amyl ethyl ether and tert-Amyl alcohol from isoamylene-ethanol-water mixtures in a batch-reactive distillation column
Varisli, D; Doğu, Timur (American Chemical Society (ACS), 2005-07-06)
tert-Amyl ethyl ether (TAEE) and tert-amyl alcohol (TAA), which are the attractive alternatives to methyl tert-butyl ether as octane-enhancing gasoline-blending components, are produced by the simultaneous etherification and hydration of 2-methyl-2-butene (2M2B) in a batch-reactive distillation column. It was shown that, by changing the reboiler temperature in the range of 90-124 degrees C, significant increases of the overall fractional conversion of 2M2B, reaching values of 0.99, were achieved in this sys...
Simultaneous dissolution and uptake of nutrients in microalgal treatment of the secondarily treated digestate
Ulgudur, Nilufer; Bayramoğlu, Tuba Hande; Demirer, Goksel N. (Elsevier BV, 2019-11-01)
Anaerobic digestion processes result in large volumes of digestates which still require the development of elaborate and viable management options to improve the sustainability of these processes. Coupling of secondary anaerobic treatment with a microalgal nutrient removal process may serve benefits such as residual biogas and associated greenhouse gas capture from the digestate content, microalgal biomass build-up and its further valorization. This study investigated the applicability a microalgal nutrient...
Simultaneous segmentation of images and shapes
Tarı, Zehra Sibel (1997-01-01)
A novel method for simultaneous image segmentation and shape decomposition is presented. The method may be applied directly to grayscale images. The method is based on the analysis of the level curves of an ''edge-strength'' function which is a measure of boundaryness of the image at each point.
Simultaneous frequency and direction finding using phase and frequency scanning antenna artays.
Tekin, İbrahim; Department of Electrical and Electronics Engineering (1992)
Citation Formats
A. Kurt, “Simultaneous hot and cold forging of hollow workpieces.,” Middle East Technical University, 2002.
METU IIS - Integrated Information Service open@metu.edu.tr