Design and analysis of hot upset forgings with non-circular cross-sections.

Download
119308.pdf
2002
Kazancı, Ernur
Show full item record
58
views
0
downloads
https://hdl.handle.net/11511/12708
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and analysis of helical coil spring forms for independent suspensions of automobiles
Yazar, Gökhan; Ünlüsoy, Yavuz Samim; Department of Mechanical Engineering (2015)
Suspension system is one of the major and indispensable subsystems for land vehicles and has functions of providing better road holding, handling, and ride comfort. There are many suspension system types used for automobiles, and MacPherson strut suspension is one of the most widely used suspension system type due to its favorable features like simplicity, low cost, and high performance. However, there exists a drawback of this suspension type; since the coil springs have no ability to absorb lateral forces...
Design and analysis of self saturable magnetic amplifier for DC motor speed control.
Can, Esen; Department of Electrical Engineering (1972)
Design and Analysis of PLLs for Line-connected Converters in Three Phase Systems
Vyawahare, D.; Kose, H.; AYDEMİR, MEHMET TİMUR; Chandorkar, M. C. (2011-09-10)
This paper is concerned with phase locked loop (PLL) structures for use in the control of line connected power electronic converters in three phase systems. Such converters have to operate under conditions in which the power system phase voltages are often unbalanced. The unbalanced and distorted line voltage vector as observed in the stationary reference frame generally has instantaneous rates of change components in the radial as well as in the angular directions. The essential task of a PLL in this conte...
Design and analysis of fixturing in assembly of sheet metal components of helicopters
Bayar, Fatih Mehmet; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2007)
Assembling of the compliant parts used in aviation industry is a challenging process. Assembly fixtures are quite important tools in this effort and widely used in industry. In fixturing of easily deformable sheet metal parts, besides restraining the rigid body motion of the parts, the possible deformations that may occur during the assembly process and the spring-back effect on the final product need to be taken in to consideration. In order to guarantee a successful assembling, in other words, to obtain t...
Design and analysis of the 3-DOF translational shock absorbing parallel manipulator
Yıldız, Gencay; Özgören, Mustafa Kemal; Department of Mechanical Engineering (2016)
In defense industry, the environmental conditions play very critical and dangerous roles for valuable and sensitive electronic equipments. One of the most dangerous situations is high level shocks caused by explosions. In order to protect the valuable assets from the dangerous effects of shock some special designed shock absorbers are needed. For some shock absorbing cases, standards products manufactured according to the Military Standards are used and their implementation is considerable easy. Helical, wi...
Citation Formats
E. Kazancı, “Design and analysis of hot upset forgings with non-circular cross-sections.,” Middle East Technical University, 2002.
METU IIS - Integrated Information Service open@metu.edu.tr