Three dimensional effects on the capacity spectrum method evalution of existing reinforced concrete building structures subjected to earthquake loads.

Download
119210.pdf
2002
Yavuz, Hüseyin
Show full item record
45
views
0
downloads
https://hdl.handle.net/11511/12739
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Three dimensional aerodynamic analysis of missiles by a panel method
Başoğlu, Osman; Özyörük, Yusuf; Department of Aeronautical Engineering (2002)
Panel methods are extensively used in aerodynamic analysis of missiles in early stages of their development. An existing TUBİTAK-SAGE panel code is modified and improved for routine and more efficient calculation of the aerodynamic coefficients of various missile configurations at subsonic and supersonic flight conditions. Particularly, the poor convergence, user unfriendliness and poor output characters of this code have been improved by modifying and adding new routines to it. Now the code with an incorpo...
Three Dimensional Grain Boundary Modeling in Polycrystalline Plasticity
Yalçınkaya, Tuncay; Firat, Ali Osman (2018-04-25)
At grain scale, polycrystalline materials develop heterogeneous plastic deformation fields, localizations and stress concentrations due to variation of grain orientations, geometries and defects. Development of inter-granular stresses due to misorientation are crucial for a range of grain boundary (GB) related failure mechanisms, such as stress corrosion cracking (SCC) and fatigue cracking. Local crystal plasticity finite element modelling of polycrystalline metals at micron scale results in stress jumps at...
Three dimensional failure analysis of pin jointed composite laminates
Evcil, Ali; Parnas, Kemal Levend; Department of Mechanical Engineering (2000)
Three dimensional fracture analysis of FGM coatings under thermomechanical loading
Yildirim, B; Dağ, Serkan; Erdogan, E (Springer Science and Business Media LLC, 2005-04-01)
The main objective of this study is to examine the three dimensional surface crack problems in functionally graded coatings subjected to mode I mechanical or transient thermal loading. The surface cracks are assumed to have a semi-elliptical crack front profile of arbitrary aspect ratio. The cracks are embedded in the functionally graded material (FGM) coating which is perfectly bonded to a homogeneous substrate. A three dimensional finite element method is used to solve the thermal and structural problems....
Three Dimensional Flow Analysis of a Cavity-Based Scramjet Combustor
Rouzbar, Ramin; Eyi, Sinan (2015-06-22)
Citation Formats
H. Yavuz, “Three dimensional effects on the capacity spectrum method evalution of existing reinforced concrete building structures subjected to earthquake loads.,” Middle East Technical University, 2002.
METU IIS - Integrated Information Service open@metu.edu.tr