Mechanical properties of the urinary bladder during filling and emptying.

Download
119301.pdf
2002
Özeren, Yavuz
Show full item record
128
views
0
downloads
https://hdl.handle.net/11511/12740
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Mechanical properties of soft liner-poly(methyl methacrylate)-based denture material
Usanmaz, Ali; Latifoglu, MA; Dogan, A; Akkas, N; Yetmez, M (Wiley, 2002-07-18)
In this study, the mechanical properties of two different permanent soft lining materials and their bonding to poly(methyl methacrylate) (PMMA) were compared. Both of the soft liners were heat-cured commercial materials. The polymerization was carried out by conventional methods suggested by manufacturer, and the curing was done at the temperature of boiling water for 5, 15, 25, and 35 min. The sample groups were tested in the computer-aided tensile-testing machine at a rate of 2 mm/min. The slow rate helps...
Mechanical Properties of 3D-Printed Elastomeric Foams
Bakır, Ali Alperen; Özerinç, Sezer (2020-11-27)
Mechanical properties of poylmer/bioceramics based 3D porous scaffolds in hard tissue engineering
Evis, Zafer (2018-11-09)
Mechanical properties of conducting H-type polysiloxane-polypyrrole graft copolymers and polytetrahydrofuran-polypyrrole block copolymers
Biran, C; Toppare, Levent Kamil; Tincer, T; Yagci, Y; Harabagiu, V (2002-11-14)
The mechanical properties of block copolymers of polypyrrole and pyrrolyl-ended azobis-polytetrahydrofuran (TPPy) and graft copolymers of pyrrolyl-ended H-type polydimethylsiloxane (SPPy) were investigated and compared with those of polypyrrole (PPy), Conducting films were prepared electrochemically at a constant potential and doped with p-toluene sulfonate. (C) 2002 Wiley Periodicals, Inc.
Mechanical properties of unsaturated polyester/montmorillonite composites
Inceoglu, AB; Yılmazer, Ülkü (2001-11-29)
Nanocomposites composed of unsaturated polyester matrix and organically modified clay filler were prepared. After the synthesis, XRD patterns showed that the interlayer spacing expanded from 1.25 nm to 4.5 nm. The mechanical properties of the nanocomposites were determined and it was found that adding only 3 w/w % organically modified clay improved the flexural modulus of unsaturated polyester by 35%. From DSC diagrams, it was found that T-g values of the nanocomposites also increased with the clay content....
Citation Formats
Y. Özeren, “Mechanical properties of the urinary bladder during filling and emptying.,” Middle East Technical University, 2002.
METU IIS - Integrated Information Service open@metu.edu.tr