Analytical solution of a ring shaped crack problem for a hollow cylinder imbedded in a dissimilar medium.

Download
2002
Maden, Özge

Suggestions

Analytical solution to the bending of a nonlinearly hardening wide curved bar
Arslan, Eray; Eraslan, Ahmet Nedim (Springer Science and Business Media LLC, 2010-02-01)
An analytical solution to the partially plastic deformation of a nonlinearly hardening wide curved bar is derived. The bar considered has a narrow rectangular cross-section and is under pure bending. The analytical treatment is based on Tresca's yield criterion, its associated flow rule and a Swift-type nonlinear hardening law. Taking numerical limits, the complete solution is verified in comparison to the linear hardening solution available in the literature.
Analytical Solution of Nonlinear Strain Hardening Preheated Pressure Tube
Eraslan, Ahmet Nedim (2008-01-01)
The analytical solution of a nonlinear strain hardening preheated tube subjected to internal pressure is presented. A state of generalized plane strain, small deformations, and temperature gradients are assumed. The analytical plastic model is based on the incremental theory of plasticity, Tresca´s yield criterion, its associated flow rule, and a Swift-type nonlinear hardening law. Solutions for linearly hardening and perfectly plastic materials are also presented.
Analytical solution of a crack problem in a radially graded FGM
Çetin, Suat; Kadıoğlu, Fevzi Suat; Department of Mechanical Engineering (2007)
The objective of this study is to determine stress intensity factors (SIFs) for a crack in a radially graded FGM layer on a substrate. Functionally graded coating with an edge crack perpendicular to the interface and a homogeneous substrate are bonded together. In order to make the problem analytically tractable, geometry is modeled as an FGM strip attached to a homogeneous layer. Introducing the elastic foundation underneath the homogeneous layer, an FGM coating on a thin walled cylinder can be modeled. At...
Analytical Solution of a Crack Problem in a Radially Graded FGM
Cetin, Suat; Kadıoğlu, Fevzi Suat (2008-09-25)
The objective of this study is to determine stress intensity factors (SIFs) for a crack in a functionally graded layer bonded to a homogeneous substrate. Functionally graded coating contains an edge crack perpendicular to the interface. It is assumed that plane strain conditions prevail and the crack is subjected to mode I loading. By introducing an elastic foundation underneath the homogeneous layer, the plane strain problem under consideration is used as an approximate model for an FGM coating with radial...
Analytical formulation of maximum length limits of integral bridges on cohesive soils
Dicleli, Murat (Canadian Science Publishing, 2005-08-01)
This paper presents an analytical approach for predicting the length limits of integral bridges built on cohesive soils based on the flexural strength of the abutments and the low cycle fatigue performance of the steel H-piles at the abutments under cyclic thermal loading. First, H-piles that can accommodate large inelastic deformations are determined considering their local buckling instability. Then, a damage model is used to determine the maximum cyclic deformations that such piles can sustain. Next, non...
Citation Formats
Ö. Maden, “Analytical solution of a ring shaped crack problem for a hollow cylinder imbedded in a dissimilar medium.,” M.S. - Master of Science, Middle East Technical University, 2002.