Design of a reactive power compensation and harmonic filtering by using field data

Download

173092.pdf

Date

2003

Author

Gültekin, Burhan

Metadata

Show full item record

Item Usage Stats

59
views

0
downloads

URI

https://hdl.handle.net/11511/13085

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design of switched capacitor ladder filters using the LDI transformation. Bayka, M Saffet; Department of Electrical Engineering (1985)
Design of a single layer micro-perforated sound absorber by finite element analysis Onen, Onursal; Çalışkan, Mehmet (Elsevier BV, 2010-01-01) Micro-perforated sound absorbers with sub-millimeter size holes can provide high absorption coefficients. This paper presents results of work on the development of an effective single layer micro-perforated sound absorber from the commercial composite material Parabeam (R) with micro diameter holes drilled on one side. Parabeam (R) is used as a structural material made from a fabric woven out of a E-glass yarn and consists of two decklayers bonded together by vertical piles in a sandwich structure with pile...
Design of a defected ground beam forming network Kilic, Ozgehan; Demir, Şimşek (2010-12-20) This text presents the design of a novel, wideband beam forming network (BFN) realized by defected ground structure (DGS). The BFN is a corporate one with equi-phase and magnitude output ports. In a regular microstrip BFN design, non-standard, thin-and-thick lines are used together with the standard-width (50 Ω) lines for matching purposes. However, in this design, the BFN is implemented by using standard-width microstrip lines, and rectangular defects at the ground with a 0.508 mm-thick Rogers RO4003C subs...
Design and implementation of a voltage source converter based statcom for reactive power compensation and harmonic filtering Çetin, Alper; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2007) In this thesis, design and implementation of a distribution-type, voltage source converter (VSC) based static synchronous compensator (D-STATCOM) having the simplest converter and coupling transformer topologies have been carried out. The VSC STATCOM is composed of a +/- 750 kVAr full-bridge VSC employing selective harmonic elimination technique, a low-pass input filter, and a /Y connected coupling transformer for connection to medium voltage bus. The power stage of VSC based STATCOM is composed of water-co...
Design of a tubular switched reluctance linear generator for wave energy conversion based on ocean wave parameters Mendes, R. P. G.; Calado, M. R. A.; Mariano, S. J. P. S.; Cabrita, C. M. P. (2011-09-10) This work presents a procedure for the design and analysis of a linear tubular switched reluctance generator for wave energy conversion. The generator is meant to be applied to a direct drive wave energy converter, namely a point absorber. The device is modeled according to wave climate conditions at Esposende site in the Portuguese coast. The procedure starts with statistical analysis of the local random ocean behavior in order to determine most likely values of occurrence for the wave parameters in questi...

Citation Formats

B. Gültekin, “Design of a reactive power compensation and harmonic filtering by using field data,” M.S. - Master of Science, Middle East Technical University, 2003.