Investigation of solids residence time on sludge characteristics with special emphasis on extracellular polymers

Download
2003
Sesay, Mohamed Lamin

Suggestions

Investigation of sludge viscosity and its effects on the performance of a vacuum rotation membrane bioreactor
KOMESLİ, Okan Tarık; Gökçay, Celal Ferdi (Informa UK Limited, 2014-03-04)
Sludge characteristics of a full-scale vacuum rotation membrane (VRM) bioreactor having plate-type membranes with 0.038 m nominal pore size and 540 m(2) surface area were investigated. The VRM plant is composed of an aeration tank and a filtration chamber. The sludge floc size distribution, as determined microscopically, was mainly between 0 and 100 m in the filter chamber with very little difference in size distribution between summer (20-25 degrees C) and winter (10-15 degrees C) seasons. Small floc size ...
Investigation of Wettability of Surface Modified Polymer Wafers Used in Micro Fluidic Device Fabrication
Baytekin, Hasan Tarık; Theısen, Janko; Schmıdt, Martın (null; 2008-11-25)
Investigation of pattern formation in planar gas discharges
Uzun Kaymak, İlker Ümit; Rafatov, İsmail (null; 2014-04-25)
Investigation of optical parameters of thermally evaporated ZnSe thin films
Gullu, H. H.; Coşkun, Emre; Parlak, Mehmet (2015-04-29)
In this work, zinc selenide (ZnSe) thin films were deposited by thermal evaporation method using pure elemental (Zn and Se) sources. The physical properties of the films have been investigated in terms of the structural and optical characterizations depending on the post-annealing process under nitrogen atmosphere in the temperature between 300 and 500 degrees C for 30 min. The structural and compositional analyses were carried out by means of X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy...
Investigation of silver-induced crystallization of germanium thin films fabricated on different substrates
Kabacelik, Ismail; KULAKCI, MUSTAFA; Turan, Raşit (2015-06-01)
Silver-induced crystallizations of amorphous germanium (alpha-Ge) thin films were fabricated through electron beam evaporation on crystalline silicon (c-Si) (100), aluminum-doped zinc oxide (AZO), and glass substrates at room temperature. The solid-phase crystallization (SPC) of alpha-Ge films was investigated for various post-annealing temperatures between 300 and 500 degrees C for 60 min. Two crystallization approaches were compared: SPC and metal-induced crystallization (MIC). The structural properties o...
Citation Formats
M. L. Sesay, “Investigation of solids residence time on sludge characteristics with special emphasis on extracellular polymers,” M.S. - Master of Science, Middle East Technical University, 2003.