Spent Nuclear Fuel Storage

Töre, Candan


Scrap tire ring as a low-cost post-tensioning material for masonry strengthening
Türer, Ahmet (2008-10-01)
Load bearing walls of masonry type construction are weak in tension and wall failure in out-of-plane bending direction is one of the common failure mechanisms. Out-of-plane bending capacity and behavior can be greatly enhanced by post-tensioning. Developing countries commonly have poor and under educated population living in self-constructed masonry houses, which are at high risk if they are located on seismically active regions. Vast amounts of used tires, which contain steel-mesh and wires vulcanized with...
Split feed flotation of Zonguldak coal fines
Muratoğlu, Reha Aykul; Hoşten, Çetin; Department of Mining Engineering (1994)
Waste inventory for a refrigerator manufacturing plant
Dönmezoğlu, Cansu; Aksoy, Ayşegül; Department of Environmental Engineering (2019)
Household appliances production, especially refrigerators, has an important share in the economy of many countries in the world and Turkey. Yet, waste production during production constitutes a problem that should be managed. For that purpose, it is important to identify the wastes from production and evaluate the environmental performance based on these wastes. In this thesis, production processes in a refrigerator manufacturing facility in Turkey are examined. Hazardous, non-hazardous and packaging wastes...
Light crude oil combustion in the presence of limestone matrix
Kök, Mustafa Verşan; Keskin, C; Madarasz, J; Bagci, S (Springer Science and Business Media LLC, 2004-01-01)
In this study the combustion characteristics of crude oils (Karakus and Beykan) in the presence of a limestone matrix were determined using the thermogravimetry (TG/DTG). Experiments were performed at a heating rate of 10degreesC min(-1), whereas the air flow rate was kept constant at 10 L h(-1) in the temperature range of 20-900degreesC. In combustion with air, three distinct reaction regions were identified in all crude oil/limestone mixtures studied known as low temperature oxidation (LTO), fuel depositi...
Steam-gas-drive laboratory tests for heavy-oil recovery
Bağcı, Ali Suat; Gumrah, F (1998-01-01)
A comprehensive laboratory study was conducted for the recovery of heavy oil from a linear (1-D) and a three-dimensional (3-D) physical models, packed with 12.4 degrees API gravity heavy oil, 60000 ppm brine and crushed limestone. A total of 19 experiments were conducted to investigate the effects of injecting CH4 or CO2 along with steam by using these laboratory models. A linear model having a 6.6-cm diameter and 100-cm length was used for the first group of experiments. In the: second group, a 3-D model w...
Citation Formats
C. Töre, “Spent Nuclear Fuel Storage,” Middle East Technical University, 1989.