Mechanical electrical and microwave properties of polypyrrole films upon ageing

Download
076026.pdf
1998
Sözmen, Volkan
Show full item record
46
views
0
downloads
https://hdl.handle.net/11511/1391
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Mechanical stability of the CMS strip tracker measured with a laser alignment system
Sirunyan, A. M.; et. al. (IOP Publishing, 2017-04-01)
The CMS tracker consists of 206m(2) of silicon strip sensors assembled on carbon fibre composite structures and is designed for operation in the temperature range from -25 to + 25 degrees C. The mechanical stability of tracker components during physics operation was monitored with a few mu m resolution using a dedicated laser alignment system as well as particle tracks from cosmic rays and hadron-hadron collisions. During the LHC operational period of 2011-2013 at stable temperatures, the components of the ...
Mechanical characterization of filament wound composite tubes by internal pressure testing
Karpuz, Pınar; Ankara, Osman Alpay; Department of Metallurgical and Materials Engineering (2005)
The aim of this study is to determine the mechanical characteristics of the filament wound composite tubes working under internal pressure loads, generating data for further investigation with a view of estimating the remaining life cycle of the tubes during service. Data is generated experimentally by measuring the mechanical behavior like strains in hoop direction, maximum hoop stresses that are formed during internal pressure loading. Results have been used to identify and generate the necessary data to ...
Mechanical behaviour of polymeric lattice structures produced by additive manufacturing
Kalaycıoğlu, Şükrü Güray; Özerinç, Sezer; Department of Mechanical Engineering (2022-11)
Additive manufacturing (AM) is a manufacturing method based on the layer-by-layer deposition of the desired geometry. Polymer AM provides means to produce compliant polymeric structures for impact-absorbing applications. The recent introduction of foaming elastomeric filaments opened a new design space for achieving optimized impact absorbance performance. This thesis investigates this route through the mechanical testing of solid and cellular polymer foam structures produced by additive manufacturing. The...
Mechanical performance of composite flat specimens and pressure vessels produced by carbon/epoxy towpreg dry winding
Okten, Yigit Kemal; Kaynak, Cevdet (2022-10-01)
The main purpose of this study is to evaluate the effects of certain processing parameters on the mechanical performance of carbon/epoxy towpreg wound composite structures. For this purpose, composite sample productions and their evaluations were conducted in two steps. In the first step, dry winding of carbon/epoxy towpregs was used to produce flat composite plates. Their evaluation was performed by rheological analysis, interlaminar shear tests, and unidirectional tensile tests. In the second step, towpre...
Mechanical Characterization of Elastomeric Lattice Parts Produced by Continuous Liquid Interface Production
Özerinç, Sezer; Neshani, Roozbeh; Mcgregor, Davis J.; Tawfick, Sameh; King, William P. (2021-11-29)
Citation Formats
V. Sözmen, “Mechanical electrical and microwave properties of polypyrrole films upon ageing,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr