Effects of process variables on the mold filling time in resin transfer molding

Download
075694.pdf
1998
Ertekin, Ayça
Show full item record
88
views
0
downloads
https://hdl.handle.net/11511/1392
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effects of operating variables on ultrafiltration of chees whey
Akman, Nuray; Tosun, İsmail; Tinçer, Teoman; Department of Chemical Engineering (1996)
Effects of bioreactor operation parameters on intracellular reaction rate distribution in beta-lactamase production by bacillus species
Arifoğlu, Müge; Çalık, Pınar; Department of Chemical Engineering (2004)
In this study, the effects of oxygen transfer (OT) on beta-lactamase production and on intracellular reaction rates were investigated with Bacillus licheniformis ATCC 2597. In order to clarify the oxygen transfer effects on the production of beta-lactamase, firstly a glucose based defined medium was designed and using this medium, the effects of bioreactor operation parameters, i.e., pH and temperature, on beta-lactamase activity and cell formation were investigated in laboratory scale batch-bioreactors usi...
Effects of Temperature on Deep Drawing of an Aluminum Alloy for Different Yield Criteria and Hardening Models
Demirkol, Rasih Hakan; Darendeliler, Haluk (2022-01-01)
Effects of different bed roughnesses on the characteristics of hydraulic jumps
Velioğlu, Deniz; Tokyay, Nuray; Department of Civil Engineering (2012)
In practice, baffle blocks and sills are commonly being used to stabilize the location of a hydraulic jump and shorten the length of a stilling basin. On the other hand, gravels, corrugations and rectangular prismatic roughnesses which cover the entire length of the basin or placed in a staggered manner may be an alternative. The objective of this study is to determine the effects of these roughness elements on the characteristics of hydraulic jumps such as conjugate depth, jump length and energy dissipatio...
Effects of mix design variables on mechanical properties of hot mix asphalt
Güler, Murat (American Society of Civil Engineers (ASCE), 2008-03-01)
Compaction of hot mix asphalt after the laydown process is one of the critical steps of construction affecting the service performance of asphalt concrete. It is known that compaction is controlled by a number of mix design variables, i.e., binder type, gradation. asphalt content, and compaction temperature. In this paper, effects of mix design variables on the mechanical properties of hot mix asphalt are investigated based on laboratory compacted specimens. A continuum model is utilized to simulate the lab...
Citation Formats
A. Ertekin, “Effects of process variables on the mold filling time in resin transfer molding,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr