Phase control by injection locking

2004
Şener, Göker
Show full item record
113
views
0
downloads
Phase angle control.
https://hdl.handle.net/11511/14279
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and Performance Analysis of a Grid Connected PWM-VSI System
Kantar, Emre; Usluer, S. Nadir; Hava, Ahmet Masum (2013-11-30)
Pulse-width modulation (PWM) voltage source inverters (VSIs) are favorable interface devices to the power grid for renewable energy systems. This paper deals with the design of the LCL-filter and inverter for the grid-connected VSI. A complete design procedure for both reactive and passive components of LCL-filter is demonstrated with a new iterative approach in selection of the filter inductors. The design process for a two-level VSI is clearly illustrated through an example and the dynamic response is inv...
Microwave sintering and characterization of soft magnetic powder metallurgical Ni-Fe alloys
Erdem, Derya; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2011)
In this study, prealloyed austenitic stainless steel and premixed soft magnetic Ni-Fe permalloy compacts were consolidated through microwave and conventional sintering routes at combinations of various sintering temperatures and compaction pressures. Sintered alloys were characterized in terms of their densification, microstructural evolution as well as mechanical and magnetic properties. The effect of sintering method in terms of the applied sintering parameters on the final properties of the compacts were...
Overall shape of sintered alumina compacts
Özkan, Necati (1997-01-01)
The extent of the thermally induced shrinkage during sintering of nominally homogeneous ceramic compacts depends upon the green density; compacts with a low green density shrink more than those with a higher density. Therefore, shape distortions of compacts with variable density during their sintering is inevitable. The overall shapes of various sintered alumina compacts, prepared using different types of alumina agglomerates, is described. The agglomerates were prepared using organic polymer [poly(vinyl al...
Frequency-Domain Estimation of a Transfer Matrix of an Uncommon Quadrotor in Hover
Baskin, Mehmet; Leblebicioğlu, Mehmet Kemal (2022-07-01)
In this article, system identification of an uncommon quadrotor in hover is discussed. Two counter-rotating big rotors on the longitudinal axis and two counter-rotating small tilt rotors on the lateral axis form this quadrotor configuration. First, the nonlinear dynamic model of this vehicle is derived from Newton-Euler formulation. Next, using the approximate linear hover model and the suitable rotor mixing matrix for axes decoupling, simplified attitude dynamics of this quadrotor are obtained. However, th...
Segment-based stereo-matching via plane and angle sweeping
Cigla, Cevahir; Zabulis, Xenophon; Alatan, Abdullah Aydın (2007-01-01)
A novel approach for segment-based stereo matching problem is presented, based on a modified plane-sweeping strategy. The space is initially divided into planes that are located at different depth levels via plane sweeping by the help of region-wise planarity assumption for the scene. Over-segmented homogenous color regions are utilized for defining planar segment boundaries and plane equations are determined by angle sweeping at different planes. The robustness of depth map estimates is improved by warping...
Citation Formats
G. Şener, “Phase control by injection locking,” M.S. - Master of Science, Middle East Technical University, 2004.
METU IIS - Integrated Information Service open@metu.edu.tr