Ideality of mixing in a continuosly fed tank /

Date

1968

Author

Yalçın, Esen

Metadata

Show full item record

Item Usage Stats

40
views

0
downloads

URI

https://hdl.handle.net/11511/14659

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Optimal Control for the MHD Fow and Heat Transfer with Variable Viscosity in a Square Duct Evcin, Cansu; Uğur, Ömür; Tezer, Münevver (null; 2018-06-08) The direct and optimal control solution of the laminar, fully developed, steady MHD flow of an incompressible, electrically conducting fluid in a duct is considered together with the heat transfer. The flow is driven by a constant pressure gradient and an external uniform magnetic field. The fluid viscosity is either temperature dependent, varying exponentially, or it depends on the flow in the case of power law fluid; and the viscous and Joule dissipations are taken into consideration. The coupled nonline...
Optimal dewatering system for an excavation of construction foundation Değirmenci, Murat; Önder, Halil; Department of Civil Engineering (1997)
Optimal Control for the MHD Flow and Heat Transfer WithVariable Viscosity in a Square Duct Evcin, Cansu; Uğur, Ömür; Tezer, Münevver (2018-06-03)
Ideal Location of Intermediate Ring Stiffeners on Discretely Supported Cylindrical Shells Topkaya, Cem (American Society of Civil Engineers (ASCE), 2014-04-01) Silos in the form of a cylindrical metal shell are commonly elevated to provide access to the space beneath, permitting the contained materials to be directly discharged. A few discrete column supports at evenly spaced intervals are commonly used. However, the structural design of discretely supported cylindrical shells presents a variety of challenges. The presence of discrete supports results in circumferential nonuniformity in the axial compressive stress as well as a progressive vertical decay above the...
OPTIMAL CONTROLLER DESIGN FOR SPEED GOVERNORS OF HYDROELECTRIC POWER PLANT Altinoz, Okkes Tolga; KOŞALAY, İLHAN; Gezer, Derya (VSB - Technical University of Ostrava, 2020-06-01) Speed governors have critical importance on hydroelectric power plants, which are adjusted to the rotating speed of hydroelectric generation based on load demand of the grid. The rotating speed is the main factor to balance power generation and load demand. The well-designed controller is needed to control speed governors with high accuracy. A well-defined model is needed to obtain desired control structure. Therefore, in this study, initially, the mathematical model of a hydroelectric power plant is obtain...

Citation Formats

E. Yalçın, “Ideality of mixing in a continuosly fed tank /,” Middle East Technical University, 1968.