Boric acid fromcolemanite by carbonation /

1973
Metin, Lokman
Show full item record
44
views
0
downloads
https://hdl.handle.net/11511/14752
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Boron removal from aqueous solutions via polymer enhanced ultrafiltration using novel Imino-bis-propane diol functional polymers
Zerze, Hasan; Özbelge, H. Önder; Yılmaz, Levent; Department of Chemical Engineering (2012)
In this work, newly synthesized poly (vinyl amino-N, N’-bis-propane diol) (GPVA) and copolymer, poly (vinyl amino-N, N’-bis-propane diol-co-DADMAC) (GPVA-co-DADMAC) were efficiently exploited for boron removal via polymer enhanced ultrafiltration (PEUF). Boron concentration could be reduced from 10ppm down to 0.4ppm using GPVA whereas it could be reduced from 10ppm down to 0.8ppm with copolymer GPVA-co-DADMAC at pH 9 and loading (boron-to-polymer mass ratio) 0.001 via continuous polymer enhanced ultrafiltra...
Boron trifluoride mediated Prins reaction of methylene diacetate with styrenes. One-pot synthesis of 3-chloro-3-arylpropanols
İŞLEYEN, ALPER; Doğan, Özdemir (Georg Thieme Verlag KG, 2006-05-03)
A one-pot procedure was developed for the synthesis of 3-chloro-3-arylpropanols, which are important starting materials for the synthesis of biologically active benzanilide derivatives. Styrenes were reacted with methylene diacetate in the presence of boron trifluoride to give the corresponding 3-chloro-3-arylpropanols in 36-84% yield by the Prins reaction. A strongly electron-donating methoxy substituent at either the ortho or para position of the styrene did not give the expected 3-chloro-3-arylpropanols ...
Boron doped hydroxyapatites in biomedical applications
Uysal, İdil; Yılmaz, Bengi; Evis, Zafer (2020-12-01)
Hydroxyapatite has been widely used in biomedical applications as a coatingmaterial for implant surfaces, a drug carrier, a scaffold or composite for bonetissue engineering applications. The highly ionic structure of hydroxyapatite allowsdoping of various ions, resulting in an improvement in its properties. Boron is oneof the elements which can be doped into hydroxyapatite structure by replacingphosphate (PO43-) or hydroxyl (OH-) sites to obtain scaffolds for bone tissueengineering applications or a coating...
Boron Oxide Production Kinetics Using Boric Acid as Raw Material
BALCI, FATMA SUNA; Sezgi, Naime Aslı; Eren, Esin (2012-08-29)
Boron oxide with a content of 99.93 wt.% from the dehydration of boric acid was synthesized. Conversion of boric acid to boron oxide was completed within 3 days at low temperature range (T < 130 degrees C) and approximately 30 min at high temperature range (T > 130 degrees C) for the isothermal dehydration reaction in the temperature range of 80 and 350 degrees C. Apparent activation energies were 65 and 28 kJ.mol(-1) for low and high temperature ranges, respectively. Thermogravimetric analysis (TGA) result...
Boron trifluoride catalyzed additions of nucleophiles to endo/exo-2-substituted norbornene derivatives
İşleyen, Alper; Sayraç, Tuğmaç; Doğan, Özdemir; Department of Chemistry (2001)
Citation Formats
L. Metin, “Boric acid fromcolemanite by carbonation /,” Middle East Technical University, 1973.
METU IIS - Integrated Information Service open@metu.edu.tr