Developing a tolerance package for rotational parts using autocad

Birbil, Gökhan


Developing a trilayer processing technique for superconducting YBa2Cu3O7-delta thin films by using Ge ion implantation
Avci, I; Tepe, M; Oktem, B; Serincan, U; Turan, Raşit; Abukay, D (IOP Publishing, 2005-04-01)
For making trilayer superconducting devices based on YBa2Cu3O7-delta (YBCO) thin film processing, we developed a new technique by employing Ge ion implantation. A YBCO thin film of 150 nm thickness having high c-axis orientation and a transition temperature, T, of 90 K was implanted with 80 keV, 1 x 10(16) Ge ions cm(-2) at room temperature. By the result of TRIM calculation, Ge ions were found to penetrate into the YBCO thin film approximately 60 nm below the surface of the film, thus leaving the lower par...
Developing an evaluation model for multimedia learning materials by using eye-tracking
Altan, Tuğba; Çağıltay, Kürşat (2018-09-07)
Developing a four-bar mechanism synthesis program in cad environment
Erener, Kaan; Söylemez, Eres; Department of Mechanical Engineering (2011)
Flap, aileron, rudder, elevator, speed brake, stick, landing gear and similar movable systems used in aerospace industry have to operate according to the defined requirements and mechanisms used in those systems have to be synthesized in order to fulfill those requirements. Generally, without the use of synthesis tools, synthesis of mechanisms are done in CAD environment by trial-error and geometrical methods due to the complexity of analytical procedures. However, this approach is time consuming since it h...
Developing optimum operation strategies for wind-hydro hybrid systems
Ercan, Eray; Kentel Erdoğan, Elçin; Department of Civil Engineering (2020)
In today's world, energy is one of the most important drivers for the continuation of civilization. Until recent years, the energy demands of the countries have been mainly supplied by fossil fuels. However, the negative effects of using fossil fuels in energy generation shifted the focus to renewable energy resources. In addition to this, the popularity of renewable energy resources increased as their costs decreased and efficiencies increased. Therefore, the integration of renewable energy systems to nati...
Developing a feature-based edge detector using artificial networks
Arpat, Güven Burç; Tekman, Gürkan; Halıcı, Uğur; Department of Cognitive Sciences (2001)
Citation Formats
G. Birbil, “Developing a tolerance package for rotational parts using autocad,” Middle East Technical University, 1997.