Effect of folding on the abrasion resistance of sole leather /

Date

1973

Author

Yener, Atilla

Metadata

Show full item record

Item Usage Stats

73
views

0
downloads

URI

https://hdl.handle.net/11511/14761

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Effect of weld repair on microstructure and mechanical properties of API 5LX65 steel Batıgün, Caner; Demircan, M.; Gür, Cemil Hakan (null; 2010-12-01) Weld repair is a common technique to remove defects in the weldments. However, particularly in the high strength low alloy steels (HSLA), heat input during weld repair causes complex changes in the microstructure and mechanical properties. In this study, the influences of repeated heat input and thermal cycle upon repair weld on the microstructure and mechanical properties of the welded joints of API 5L X65 were investigated via optical microscopy, scanning electron microscopy; Charpy-V impact, Vickers hard...
EFFECT OF OUT-OF-AUTOCLAVE CURING ON THE BENDING STRENGTH OF TPNCF AND UNIDIRECTIONAL LAMINATES Bozkurt, Mirac Onur; Bilge, Kaan; Papila, Melih; Çöker, Demirkan (null; 2017-09-20) Out-of-autoclave(ooA)treatments in composite manufacturing draw the attention ofmanufacturers anddesigners in aerospace industry by offering numerous advantages over the traditional autoclave processing. Besides, thin ply non crimp fabric (TPNCF) architecture is proven for improved delamination resistance and fracture toughness. The objective of the study is comparingthe bending strength of flat and curved beams of TPNCF [0/45] and Unidirectional (UD)[0/45] aut...
Effect of lay-up orientation on fracture toughness of CFRP laminates Yavuz, Burak Ogun; Çöker, Demirkan; Parnas, Kemal Levend (2018-12-01) Delamination in advanced composites, which causes reduction in the laminate strength, has been a continuing problem. Since it is relatively easier to manufacture, the general practice for the fracture toughness is to conduct tests with 0//0 interface and use these experimental values in the analyses. However, the fracture toughness values are known to vary for different angle interfaces. This happens to be a significant issue in the case of impact. When interlaminar properties of only 0//0 interface is used...
Effect of curing on the undrained shear strength of compacted clays Gürol, Alp; Mirata, Türker; Department of Civil Engineering (2000)
Effect of processing on functional properties of carrot pulp added extrudates Ortak, Melda; Şensoy, İlkay (2014-04-02)

Citation Formats

A. Yener, “Effect of folding on the abrasion resistance of sole leather /,” Middle East Technical University, 1973.