Diesel soot oxidation catalyst filter system design

Download

index.pdf

Date

2005

Author

Genç, Volkan Eyüp

Metadata

Show full item record

Item Usage Stats

77
views

44
downloads

The objective of this study was onboard testing of a mixed metal oxide diesel soot oxidation catalyst composing of oxides of lead and cobalt previously developed in our lab, by mounting a diesel particulate filter (DPF), which is coated with this catalyst, to the exhaust stream of a diesel vehicle. Commercial wall flow type DPF̕s (Corning EX-80) were coated with the catalyst by a slurry wash-coating procedure and then mounted on the exhaust stream of a diesel light duty vehicle (LDV) provided by TOFAS (FIAT Doblo 1.9 JTD). These vehicles were driven on the rollers of the chassis dynamometer at constant speed and gear for two different loading conditions and on a standard driving cycle (NEDC) in the Test and Emission Laboratory of TOFAS-FIAT. The exhaust gases were analyzed for NOx, CO, CO2, THC and PM. The pressure drop caused by the filter was monitored during these tests as an indication of soot accumulation on the filter with the help of pressure sensors placed before and after the filter. Also temperatures before, inside and after the filter were monitored by means of thermocouples. Three different filters were tested in this manner: (1) Monocoated (CoOx), (2) Sequential PbOx coated over CoOx (PbOx/CoOx), (3) Simultaneously coated (PbCoOx). Also tests with the uncoated filter were performed to determine the pressure drops as a result of non-catalytic soot oxidation. The performances of the catalytic filters were evaluated by determining the temperature at which the soot oxidation rate on the filter equals the soot production rate in the engine (balance point temperature-Tbal). This temperature was used for comparing the catalytic activity of the supported catalyst with that of the powder form tested in the laboratory, i. e. Tpeak. The results of the onboard test were in parallel with the previous laboratory studies with similar catalytic activity temperatures. The

Subject Keywords

Chemistry.

URI

http://etd.lib.metu.edu.tr/upload/12606189/index.pdf
https://hdl.handle.net/11511/15178

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Preparation and characterization of carbon supported platinum nanocatalysts with different surfactants for C1 to C3 alcohol oxidations Ertan, Salih; Gökağaç Arslan, Gülsün; Department of Chemistry (2011) In this thesis, carbon supported platinum nanoparticles have been prepared by using PtCl4 as a starting material and 1-octanethiol, 1-decanethiol, 1-dodecanethiol and 1-hexadecanethiol as surfactants for methanol, ethanol and 2-propanol oxidation reactions. The structure, particle sizes and surface morphologies of the platinum were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). XRD and TEM results indicate that all prepared catalysts have ...
The preparation and characterization of zeolite confined rhodium(0) nanoclusters: a heterogeneous catalyst for the hydrogen generation from the methanolysis of ammonia-borane Çalışkan, Salim; Özkar, Saim; Department of Chemistry (2010) Among the new hydrogen storage materials, ammonia borane (AB) appears to be the most promising one as it has high hydrogen content, high stability, and being environmentally benign. Dehydrogenation of AB can be achieved via hydrolysis, thermolysis or methanolysis. Methanolysis of AB eliminates some drawbacks of other dehydrogenation reactions of AB. The use of colloidal and supported particles as more active catalyst than their bulky counterparts for the hydrolysis of AB implies that reducing the particle s...
Nano structural metal composites : synthesis, structural and thermal characterization Kaleli, Kadir; Kayran İşçi, Ceyhan; Department of Chemistry (2008) In this work , metal functional polymers, namely Cr-PS-b-P2VP, Co-PS-b-P2VP, Au-PS-b-P2VP, Fe-PS-b-P2VP and Mo-PS-b-P2VP were prepared by thermal reaction of hexacarbonylchromium, Cr(CO)6, octacarbonyldicobalt,Co2(CO)8, hydrogentetrachloroaurate(III), H(AuCl4).4H2O, trichloroiron(III), FeCl3.6H2O, molybdenum(VI)oxide, MoO3 and PS-b-P2VP. TEM images indicated formation of AuIII, Cr and Co nanoparticles. On the other hand, crystalline structures were detected for Fe-PS-b-P2VP and Mo-PS-b-P2VP. Samples involvi...
In-situ generation of poly(n-vinyl-2-pyrrolidone)-stabilized palladium(0) and ruthenium(0) nanoclusters as catalysts for hydrogen generation from the methanolysis of ammonia-borane Erdoğan, Huriye; Özkar, Saim; Department of Chemistry (2010) More attention has been paid to find new type renewable energy sources because of increasing concern about the environmental problems arising from the combustion of fossil fuels as energy sources. The development of new storage materials will facilitate the use of hydrogen as a major energy carrier. Several possibilities exist for ‘‘solid-state’’ storage: the hydrogen can be trapped in metal organic frameworks, carbon nanotubes and certain alloys; or one can use materials in which hydrogen is already presen...
Development of new synthetic methodologies for indole derivatives Kılıklı, Ahmet Alper; Balcı, Metin; Department of Chemistry (2010) Synthesizing nitrogen containing heterocyclic compounds is one of the leading research areas throughout the organic chemistry due to their significant activities on biological systems. Among the various biologically active molecules, indole derivatives are of prime importance on the grounds of their proven clinical roles. Objective of this study is to synthesize new indole derivatives those may contribute treatment of several diseases like their analogues via a recently developed synthetic methodology. Besi...

Citation Formats

V. E. Genç, “Diesel soot oxidation catalyst filter system design,” M.S. - Master of Science, Middle East Technical University, 2005.