Design and realization of a microcontroller controlled line overcurrent production relay

Download
075726.pdf
1998
Öztürk, Engin
Show full item record
165
views
796
downloads
https://hdl.handle.net/11511/1535
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and implementation of a microwave cavity resonator for modulated backscattered wave
Akkoç, Ahmet; Demir, Şimşek; Department of Electrical and Electronics Engineering (2015)
In this study, the device called “Theremin’s Bug” which is a passive microwave cavity resonator is analyzed in detail and a similar device is designed, simulated and implemented. The device being the predecessor of modulated backscatter wave communication devices, RFID devices and microwave wireless sensors is invented by Russian inventor Leon Theremin in 1940s, and used as a covert spy device. The structure is totally passive and contains no electronic component and no battery. It uses the modulation of ba...
Design and realization of A 0.5-5 GHz cascaded feedback amplifier
Korkmaz, İbrahim Cem; Koç, Seyit Sencer; Department of Electrical and Electronics Engineering (2015)
Wideband amplification is one of the most examined study areas in microwave engineering. In this thesis work, 2-stage amplifier operating in decade bandwidth of 0.5-5 GHz is designed, simulated and demonstrated using two different discrete transistors. Designed amplifier is based on cascaded feedback amplifier concept. In order to flatten the gain of the designed amplifier, feedback topology is applied to both stages. Primarily, first stage is designed and demonstrated with flat gain of 7.8±1.2 dB and minim...
Design and construction of a two stage electrohydraulic servovalve with force feedback
Kapucu, Sadettin; Bayseç, Sedat; Department of Mechanical Engineering (1990)
Design and modeling of a novel rectifier with ceramic hollow fiber membrane contactor for miniaturized absorption cooling devices
Özkan, Onur; Güvenç Yazıcıoğlu, Almıla; Baker, Derek Keıth; Department of Mechanical Engineering (2015)
Miniaturized and mobile absorption cooling devices may be used in many applications, but effective and small size heat and mass exchangers are required. Ceramic hollow fiber membranes are thermally stable so that they can be used for the rectification of ammonia in an absorption cooling device. In this study the simultaneous heat and mass transfer between the ammonia-water vapor and the reflux liquid is modeled in a rectifier and stripper with hydrophobic ceramic hollow fiber membranes. A similar model is u...
Design and Fabrication of a Novel Wideband DNG Metamaterial with the Absorber Application in Microwave X-Band
Mahmood, Ahmed; Yetkin Öğücü, Gölge; Sabah, Cumali (Hindawi Limited, 2017)
A novel metamaterial, which exhibits a wideband double negative behavior in X-band, is proposed, designed, and investigated in this paper. The metamaterial is composed of modified S-shaped split-ring resonators (S-SRR). The periodic structure is designed and simulated using CST MWs. Next, the experiments are carried out, and it is shown that the simulation and the experimental results agree well and the designed structure has a wide bandwidth in X-band. An absorber application of this metamaterial is also p...
Citation Formats
E. Öztürk, “Design and realization of a microcontroller controlled line overcurrent production relay,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr