Production and heat treatment of alloyed high strength ductile iron

Download
075656.pdf
1998
Türker, Funda Şeniz
Show full item record
121
views
0
downloads
https://hdl.handle.net/11511/1540
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production and characterization of alumina fiber reinforced squeeze cast aluminum alloy matrix composites
Keleş, Özgür; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2008)
The aim of the present study was to investigate the effects of different levels of Saffil alumina fiber addition, magnesium content in aluminum alloy matrix and casting temperature on the mechanical behavior, microstructure and physical properties of short fiber reinforced aluminum matrix composites. The main alloying element silicon was kept constant at 10 wt%. Magnesium contents were selected as 0.3 wt% and 1 wt%. Saffil alumina fiber preforms varied from 10 to 30 vol%. The casting temperatures were fixed...
Production and microstructure characterisation of silicon carbide reinforced aliminium-copper alloy matrix composites by squeeze casting method
Onat, Adem; Öztürk, Tayfun; Yılmaz, fevzi; Department of Metallurgical Engineering (1995)
Production and heat treatment of 6111 aluminum alloy sheet for car body panel application
Sevimli, Aylin; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2015)
Aluminum is one of the major candidates to supply sufficient weight reduction without missing mechanical properties and performance. Therefore, studies have been focused on improving properties of aluminum in automotive application since 1920s. Heat treatable aluminum alloy are used in car body panels of automotive application such as 2xxx, 7xxx and 6xxx series aluminum alloys base on the mechanical properties. On the other hand, based on physical and economical properties 6xxx series aluminum alloys are wi...
Production and assesment of compacted graphite iron diesel engine blocks
Alkan, Anıl; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2011)
In Diesel engine blocks properties such as tensile strength, heat conductivity, sound damping, engine vibration and noise are strongly influenced by graphite shape and volume percent in the matrix microstructure. In this study, the engine blocks were produced at ELBA Basınçlı Döküm Odöksan Cast iron foundry in Osmaneli Turkey by performing casting into furan resin sand and preparing cast iron liquid alloy in induction furnace that were treated with Mg by using ladle method. The main purpose of this study is...
Production and characterization of lead magnesium niobate-lead titanate ceramics
Çamurlu, Hasan Erdem; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2001)
Citation Formats
F. Ş. Türker, “Production and heat treatment of alloyed high strength ductile iron,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr