Cutting tool selection and cutting data optimization for nickel-based superalloys

Download
076013.pdf
1998
Pilatin, Semih
Show full item record
50
views
0
downloads
https://hdl.handle.net/11511/1630
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Cutting strategies for forging die manufacturing on cnc milling machines
Özgen, Arda; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2008)
Manufacturing of dies has been presenting greater requirements of geometrical accuracy, dimensional precision and surface quality as well as decrease in costs and manufacturing times. Although proper cutting parameter values are utilized to obtain high geometrical accuracy and surface quality, there may exist geometrical discrepancy between the designed and the manufactured surface profile of the die cavities. In milling process; cutting speed, step over and feed are the main cutting parameters and these pa...
Cutting performance assessment of a medium weight roadheader at Çayırhan coal mine
Keleş, Serhat; Bölükbaşı, Naci; Department of Mining Engineering (2005)
In this thesis, in-situ instantaneous cutting rates of boom type, medium-weight milling type roadheaders (Mk-2B) at Çayırhan Coal Mine are determined by studying previous performance tests and carrying out additional underground cutting tests. Some rock properties such as uniaxial compressive strength, tensile strength, Cone Indenter hardness, Shore hardness, Schmidt hammer rebound hardness and laboratory cutting specific energies are determined by laboratory tests for the rock and coal types encountered in...
Processing optimization of SiO2-capped aluminum-doped ZnO thin films for transparent heater and near-infrared reflecting applications
Can, Hilal Aybike; Tonbul, Beyza; PİŞKİN, FATİH; Öztürk, Tayfur; AKYILDIZ, HASAN (2021-01-01)
In this study, a series of optimization steps were performed in the production of Al-doped ZnO (AZO) thin films to tailor their properties as efficient transparent heaters and for near-infrared (NIR) reflectance. The films were produced on 50 x 75 mm(2) glass substrates via magnetron sputtering and capped with a protective SiO2 layer. Processing parameters such as deposition temperature, film thickness, and annealing conditions were all optimized in terms of structure, morphology, optical/electrical propert...
Punching shear tests of normal- and high-strength concrete flat plates
Ozden, Sevket; Ersoy, Ugur; Ozturan, Turan (Canadian Science Publishing, 2006-11-01)
Experimental research was conducted to investigate the punching shear performance of flat plates. A large number of slab specimens of normal- and high-strength concrete were tested Under concentric and eccentric loads. The effects of flexural reinforcement and the use of steel fiber reinforcernent were investigated. Experimental expressions werw developed for the computation Of residual slab strength. Experimentally observed punching, shear capacities were compared with those from the provisions of Canadian...
Bending Tool Design for a Complex Part Using a Finite Element Analysis Based Approach
Esat, Volkan; Darendeliler, Haluk; Gökler, Mustafa İlhan (2011-06-26)
Citation Formats
S. Pilatin, “Cutting tool selection and cutting data optimization for nickel-based superalloys,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr