Inverse kinematics of industrial robots VIA analytical and semianalytical methods

Download
075703.pdf
1998
Baykurt, H Murat
Show full item record
97
views
0
downloads
https://hdl.handle.net/11511/1634
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Inverse design of compressor cascades on parallel computers
Özhamam, M.; Eyi, Sinan (2002-01-01)
In this paper, the performance improvements of an inverse compressor cascade design are investigated. A Navier-Stokes code is used for flow analysis. A least-square optimization method is used to minimize pressure discrepancies between initial and target cascades. In optimization process, most of the CPU time is associated with the sensitivity analyses. Sensitivities are evaluated on parallel computers by using a finite difference approach. Results show that, analyzing sensitivities on parallel computers re...
Inverse design of compressor cascades
Kaplan, B.; Eyi, Sinan (2001-12-01)
In this paper an inverse design method is presented which couples a Navier-Stokes flow solver and a numerical optimization algorithm. The design method generates a compressor cascade, producing a specified surface pressure distribution at a transonic speed. A least-square optimization technique is used to minimize pressure discrepancies between the target and designed cascades. In order to represent the nonlinear, rotational and viscous physics of transonic flows, Navier-Stokes equations are used to predict...
Nonlinear modeling and flight control system design of an unmanned aerial vehicle
Karakaş, Deniz; Balkan, Raif Tuna; Department of Mechanical Engineering (2007)
The nonlinear simulation model of an unmanned aerial vehicle (UAV) in MATLAB®/Simulink® environment is developed by taking into consideration all the possible major system components such as actuators, gravity, engine, atmosphere, wind-turbulence models, as well as the aerodynamics components in the 6 DOF equations of motion. Trim and linearization of the developed nonlinear model are accomplished and various related analyses are carried out. The model is validated by comparing with a similar UAV data in te...
Inverse dynamics control of parallel manipulators around singular configurations
Özdemir, Mustafa; İder, S. Kemal; Department of Mechanical Engineering (2008)
In this thesis, a technique for the motion of parallel manipulators through drive singularities is investigated. To remedy the problem of unbounded inverse dynamics solution in the neighborhood of drive singularities, an inverse dynamics controller which uses a conventional inverse dynamics control law outside the neighborhood of singularities and switches to the mode based on the formerly derived modified equations inside the neighborhood of singularities is proposed. As a result, good tracking performance...
Nonlinear 3D Modeling and Vibration Analysis of Horizontal Drum Type Washing Machines
Baykal, Cem; Ciğeroğlu, Ender (2019-01-31)
Citation Formats
H. M. Baykurt, “Inverse kinematics of industrial robots VIA analytical and semianalytical methods,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr