Uniaxially loaded high strength concrete spiral columns part II

Download
1998
Koru, Zeki Burak

Suggestions

Uniaxially loaded high strength concrete spiral columns
Tümer, Önder; Özcebe, Güney; Department of Civil Engineering (1995)
Prefabricated lightweight concrete exterior wall panel for office buildings.
Altınyuva, Sibel; Department of Architecture (1976)
Strut and Tie Topology for Reinforced Concrete Elements
Işıklı, Yunus; Binici, Barış; Tuncay, Kağan (2021-09-08)
Strut and Tie Model (STM) is a lower-bound design method for reinforced concrete members. It is usuallypreferred for non-standard structural elements for which internal forces are not well-defined. In recent years,studies and applications on STM have increased considerably. Topology optimization methods are generallyused to find struts and ties. Once locations and orientations of reinforcements are available, the design procedureis rather easy to apply, even for complex geometries. However, finding the STM ...
Fully Floating Suspended Ceiling System: Experimental Evaluation of Structural Feasibility and Challenges
Pourali, Atefeh; Dhakal, Rajesh P.; MacRae, Gregory; Tasligedik, Ali Sahin (SAGE Publications, 2017-11-01)
Full scale shake table testing is conducted on a novel type of suspended ceiling called fully floating ceiling system, which is freely hung from the floor above lacking any lateral bracing and connections with the perimeters. A gap is provided on all sides of the ceiling. Throughout different tests, a satisfactory agreement between the fully floating ceiling response and simple pendulum theory was demonstrated. When subjected to input motions with significant energy in the floating ceiling's resonant freque...
Single span steel bridge structures of minimum weight.
Ekmekji, Samir; Department of Civil Engineering (1970)
Citation Formats
Z. B. Koru, “Uniaxially loaded high strength concrete spiral columns part II,” Middle East Technical University, 1998.