Determination of equivalent circuit parameters of three phase induction machines with finite elements.

Çekiç, Anıl


Determination of flow curves of the metastable austenite
Şimşir, Caner; Davut, Kemal; Gür, Cemil Hakan (null; 2014-09-01)
Thermo-mechanical properties of metastable austenite are significant parameters for the prediction of distortion and residual stresses by heat treatment simulations. Unfortunately, acquisition of thermo-mechanical properties of a metastable phase in the complete process temperature range requires special techniques and instrumentation. in this study, flow curves of metastable austenite of SAE 52100 (EN ıoOCr6) steel were characterized by special compression tests conducted on a deformation dilatometer in 30...
Determination of kinetic parameters and hydrogen desorption characteristics of MgH2-10 wt% (9Ni-2Mg-Y) nano-composite
Pourabdoli, Mehdi; Raygan, Shahram; Abdizadeh, Hossein; Üner, Deniz (2013-09-10)
Hydrogen desorption kinetic parameters of MgH2 compounds were measured and compared with published gas solid reaction models. The compounds investigated in this study were as-received MgH2, ball milled MgH2, and MgH2 ball milled with 9Ni-2Mg-Y catalyst compound. It was determined that different models were necessary to fit the hydrogen desorption data collected at different temperatures on the same sample, indicating that desorption mechanisms changed with respect to temperature. Addition of (9Ni-2Mg-Y) all...
Determination of optical parameters of Ga0.75In0.25Se layered crystals
IŞIK, MEHMET; Hasanlı, Nızamı (2012-05-01)
The optical properties of the Ga0.75In0.25Se crystals have been investigated by means of transmission and reflection measurements in the wavelength range of 380-1100 nm. The analysis of the results performed at room temperature revealed the presence of optical indirect transtions with band gap energy of 1.89 eV. The variation of the band gap energy as a function of temperature was also studied in the temperature range of 10-300 K. The rate of change of band gap energy (? = 6.2 x 10(4) eV/K) and absolute zer...
Determination of the Interface Properties of p-CZTSe/n-Si Nanowire Heterojunction Diode
Bayraklı, Özge; Terlemezoğlu, Makbule; Güllü, Hasan Hüseyin; Yıldız, Dilber Esra; Çolakoğlu, Tahir; Coşkun, Emre; Parlak, Mehmet (null; 2017-12-01)
Determination of minimum energy configuration of N equal point charges placed on an infinitely thin, conducting disk
Oymak, Hüseyin; Erkoç, Şakir; Department of Physics (2000)
Citation Formats
A. Çekiç, “Determination of equivalent circuit parameters of three phase induction machines with finite elements.,” Middle East Technical University, 1998.