Prodoction of the additives for environmentally bening gasoline.

Download
068799.pdf
1997
Gönderten, İlknur
Show full item record
59
views
0
downloads
https://hdl.handle.net/11511/1978
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Dehydration of Industrial Byproduct Solutions for Recycling via Pervaporation-Adsorption Hybrid Process
Büküşoğlu, Emre; Kalıpçılar, Halil; Yılmaz, Levent (2018-02-14)
Dehydration of used solvents in the printing and packaging industry is required in order to reuse or increase the commercial value of the solvents. In this study, a pervaporation-liquid-phase adsorption hybrid process for dehydration of a low-value byproduct solution obtained from a real operation was examined. The byproduct solution contained water varying in the range of 1-11.5 wt %, and the majority of the rest is ethanol and isopropanol with minor components such as ethyl acetate and methoxy propanol. W...
Consumable electrode steel remelting.
Eron, Piyale; Department of Metallurgical Engineering (1974)
Briquetting of Beypazari lignite.
Ölçer, Özer; Department of Mining Engineering (1972)
DESORPTION OF RESIDUAL MONOMER FROM PVC RESINS IN A FLUIDIZED-BED DRIER
BOUAFFAR, H; Yılmazer, Ülkü; ELBIRLI, B (Wiley, 1994-02-07)
The present study deals with the investigation of the desorption of vinyl chloride from various commercial and experimental suspension PVC resins in a laboratory fluidized bed drier simulating an industrial drier. The results show that PVC resins may differ widely in the rate at which the monomer is desorbed. The rate of diffusion of the monomer is a function of the drying time, the fluidization air temperature, the porosity, and the amount of glassy particles in the PVC. The residual monomer content decrea...
Miscibility of methylmethacrylate-co-methacrylic acid polymer with magnesium, zinc, and manganese sulfonated polystyrene ionomers
Alkan, C; Yurtseven, N; Aras, L (2005-01-01)
The miscibility of methyl methacrylate-co-methacrylic acid polymer (MMA-MAA) with metal neutralized sulfonated polystyrene ionomers was investigated by viscometry, differential scanning calorimetry (DSC), and Fourier transform infrared radiation spectroscopy (FTIR) techniques. Polystyrene (PS) was sulfonated by acetic anhydride and sulfuric acid and the sulfonation degree was found to be 2.6 mole percent, and 2.6 mole percent sulfonated polystyrene was neutralized by Mg, Zn, and Mn salts. The miscibility be...
Citation Formats
İ. Gönderten, “Prodoction of the additives for environmentally bening gasoline.,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr