Finite element and experimental analysis of adhesively bonded lap joints in multi-layer composite plates

Download

075756.pdf

Date

1998

Author

Özgül, Murat

Metadata

Show full item record

Item Usage Stats

64
views

0
downloads

URI

https://hdl.handle.net/11511/1995

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Finite element analysis and tests of composite beams with fiber bragg grating sensors under torsional load for structural health monitoring applications Karataş, Cansu; Yaman, Yavuz; Department of Aerospace Engineering (2017) In this thesis, feasibility of Fiber Bragg Grating sensors for Structural Health Monitoring applications of composite structures is studied. The method and essentials for the manufacturing process of composite beams with embedded Fiber Bragg Grating sensors are presented. Composite beams instrumented with surface bonded and embedded Fiber Bragg Grating sensors are tested under static torsional load. In addition, Finite Element Analyses of composite beams under torsional load is conducted using the commercia...
Finite element analysis of springback in bending process. Esat, Volkan; Darendeliler, Haluk; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2002)
Finite element analysis of bending operation of aluminum profiles Penekli, Ufuk; Darendeliler, Haluk; Department of Mechanical Engineering (2008) Bending process is an important forming process in most industrial fields. Springback and cross-section distortion are commonly faced problems in bending process. Springback behavior of closed and open section beams changes with different parameters such as cross-section type, cross-section dimensions, bend radius and bend angle. For closed sections like tube, the dominating problem is cross-section distortion. The thickness of the tube at intrados (inner surface of tube being in contact with die) increases...
Finite element analysis and practical modeling of reinforced concrete multi-bin circular silos Balkaya, C; Kalkan, E; Yuksel, SB (2006-05-01) Stress resultants in overlapping wall regions (intersection walls) of multi-bin circular silos require a significant computational effort to determine forces due to structural continuity. This paper presents a practical equivalent beam model for computing design forces along the silo walls when subjected to various internal and interstice loadings. The equivalent beam model of intersection wall was developed based on the effective length concept, and verified in a comprehensive series of finite element (FE)...
Finite Element Analysis of Simultaneous Electromagnetic and Heat Transfer Equations in HTS Coil Tunç, Serhat; Erdoğan, Muzaffer; Yıldız, Şükrü; Çiçek, Ahmet; Keysan, Ozan; İnanır, Fedai (2016-12-24)

Citation Formats

M. Özgül, “Finite element and experimental analysis of adhesively bonded lap joints in multi-layer composite plates,” Middle East Technical University, 1998.