Pressed lightweight masonry units from expanded ferrochromium slag

Download
1998
Azanbaeva, Saoule K

Suggestions

Punching shear reinforcement for flat plates
Niksarlıoğlu, Buğra Baturay; Tankut, Tuğrul; Department of Civil Engineering (1998)
Printed cicuit board design using channel routing technique.
Karasoy, Tanju; Department of Electrical Engineering (1984)
Cracked elastic annulus bonded to rigid cylinder
Yılmaz, Engin; Geçit, M. Ruşen; Department of Engineering Sciences (2005)
In this study, a long annulus bonded to a rigid cylinder containing an axisymmetric circumferential crack of width (d-c) at the midplane is considered. The material of the annulus is assumed to be linearly elastic and isotropic. The external surface of the annulus is free of stress. Surfaces of the crack are subject to distributed compressive loads. The Fourier and Hankel transform techniques are used to solve the governing equations which are reduced to a singular integral equation for crack surface displa...
High-volume natural pozzolan concrete for structural applications
Uzal, Burak; Turani, Lutfullah; Mehta, P. Kumar (2007-09-01)
This paper presents the results of preliminary studies on concrete mixtures containing high volumes of natural pozzolan-(50%- by mass of total cementitious materials) for- structural applications. Three different kinds, of natural pozzolans from. Turkish deposits were used to prepare the high-volume natural pozzolan (HVNP) concrete. mixtures. Two additional mixtures with a high-volume of low-calcium fly ash and granulated blast-furnace slag were also prepared for comparison purposes. In addition, a conventi...
Expanded Graphite / Polypyrrole Nanocomposite Supercapacitors on Paper
Yüksel, Recep; Uysal, Nilperi; Aydınlı, Alptekin; Ünalan, Hüsnü Emrah (2018-09-10)
Citation Formats
S. K. Azanbaeva, “Pressed lightweight masonry units from expanded ferrochromium slag,” Middle East Technical University, 1998.