Design of a microprocessor-based reactive power compensator

Download
082686.pdf
1999
Kutluay, Koray
Show full item record
111
views
0
downloads
https://hdl.handle.net/11511/2060
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design of a multi-layer beam-steering WLAN antenna
Yilmaz, Kardelen; Nesimoglu, Tayfun (2018-11-02)
This paper represents the design of a microstrip patch antenna which is reconfigurable by means of the effect of a pixel grid overlay that is placed at a certain distance from the antenna. hi addition to beam steering capability, this article will focus on several important parameters of the aforementioned antenna, such as, the directivity, the gain, radiation pattern and polarization. The antenna consists three main parts; a rectangular microstrip patch antenna that has the operating frequency at around 2....
Design of a multi-frequency underwater transducer using cylindrical piezoelectric elements
Yavuz, Şiar Deniz; İder, Kemal S.; Köymen, Hayrettin; Department of Mechanical Engineering (2011)
In this thesis, numerical and experimental design of a multi-frequency underwater acoustic transducer with cylindrical piezoelectric ceramic tubes is studied. In the numerical design, the acoustic, mechanical and thermal performances of the transducer are investigated by means of finite element method (FEM) in ANSYS. The design of the transducer that meets the acoustic requirements is checked in terms of the mechanical and thermal performances. After the completion of the numerical design, the transducer is...
Design of a microprocessor controlled 3-D workbench
Dayanç, Koray; Bulut, Mehmet Mete; Department of Electrical and Electronics Engineering (1999)
Design of series-fed printed slot antenna arrays excited by microstrip lines
İncebacak, Mustafa; Alatan, Lale; Department of Electrical and Electronics Engineering (2010)
Series-fed printed slot antenna arrays excited by microstrip lines are low profile, easy to manufacture, low cost structures that found use in applications that doesn’t require high power levels with having advantage of easy integration with microwave front-end circuitry. In this thesis, design and analysis of microstrip line fed slot antenna arrays are investigated. First an equivalent circuit model that ignores mutual coupling effects between slots is studied. A 6-element array is designed by using this e...
Design of a single layer micro-perforated sound absorber by finite element analysis
Onen, Onursal; Çalışkan, Mehmet (Elsevier BV, 2010-01-01)
Micro-perforated sound absorbers with sub-millimeter size holes can provide high absorption coefficients. This paper presents results of work on the development of an effective single layer micro-perforated sound absorber from the commercial composite material Parabeam (R) with micro diameter holes drilled on one side. Parabeam (R) is used as a structural material made from a fabric woven out of a E-glass yarn and consists of two decklayers bonded together by vertical piles in a sandwich structure with pile...
Citation Formats
K. Kutluay, “Design of a microprocessor-based reactive power compensator,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr