Error concealment in 3d video

Download
index.pdf
2011
Aydoğmuş, Sercan
Show full item record
43
views
36
downloads
Cylindrically conformal microstrip antennas are investigated. Two different structures, namely proximity coupled and E-shaped microstrip antennas are analyzed and information about the design parameters is obtained by means of parametric study. With these structures, cylindrical arrays, having omnidirectional radiation in the circumferential plane of the cylinder, are designed. Proximity coupled cylindrical arrays operate in the 2.3-2.4 GHz aeronautical telemetry band with approximately 4% bandwidth. On the other hand, more than 30% bandwidth is obtained by E-Shaped cylindrical array antenna structure, which also includes the commercial telemetry band. In order to verify the simulation method, a fabricated antenna in literature is simulated and acceptable agreement with simulation and fabrication results obtained.
Three-dimensional display systems.
http://etd.lib.metu.edu.tr/upload/12613914/index.pdf
https://hdl.handle.net/11511/20821
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis and design of cylindrically conformal microstrip antennas
Taşoğlu, Ali Özgür; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2011)
Cylindrically conformal microstrip antennas are investigated. Two different structures, namely proximity coupled and E-shaped microstrip antennas are analyzed and information about the design parameters is obtained by means of parametric study. With these structures, cylindrical arrays, having omnidirectional radiation in the circumferential plane of the cylinder, are designed. Proximity coupled cylindrical arrays operate in the 2.3-2.4 GHz aeronautical telemetry band with approximately 4% bandwidth. On the...
Algebraic spectral moments based moving clutter parameter estimation and clutter suppression
Oktar, Onur; Tanık, Yalçın; Department of Electrical and Electronics Engineering (2014)
In many modern radar systems, it is desired to detect the presence of targets in the interference which includes clutter and noise. Various signal processing techniques are proposed to effectively suppress the clutter and increase the signal to interference ratio. To achieve optimum suppression, radar system must know clutter characteristics and process the radar echoes based on these characteristics. For ground radars, the clutter environment characteristics are relatively stable and predictable. These cha...
Fast simulation and modeling of scattering from targets in MIMO imaging systems
Gül , Yunus Emre; Alatan, Lale; Department of Electrical and Electronics Engineering (2022-5-11)
The forward model analysis in a multiple input multiple output (MIMO) system requires the computation of the signals received by receiver antennas when various targets are illuminated by a transmitter antenna. The full wave analysis of such systems provides accurate results with high computational cost. Fast analysis of the system can be achieved by simple models based on several approximations which limits the accuracy. In this thesis, a modeling technique that provides better accuracy compared to simple m...
A Comprehensive study on RF energy harvesters: modelling, design, and implementation
Gharehbaghi, Kaveh; Külah, Haluk; Koçer, Fatih; Department of Electrical and Electronics Engineering (2016)
The Dickson and the threshold self-compensated UHF rectifier architectures are investigated in detail. At first, the Dickson architecture is studied by aiming to find an accurate yet general input-output relationship. It is revealed that the ratio of peak forward current over the load current could be well approximated for broad range of incoming RF amplitudes. For threshold self-compensated UHF rectifiers, a behavioral model is presented for core unit of the structure to ease the analytical discussions. Th...
Design and implementation of VHF-UHF antenna with non-foster matching circuit
Aşcı, Cihan; Aydın Çivi, Hatice Özlem; Department of Electrical and Electronics Engineering (2018)
Matching networks are widely used in the antenna transmitter and receiver applications and thus they are an essential part of the RF system. Conventional passive matching networks are very broadly used for matching an antenna for a narrow band of frequencies; however, achieving a broad bandwidth characteristics for electrically–small antennas (ESAs) is not possible with the use of passive matching circuits. ESAs possess a large input reactance and the electrical size of the antenna element is very small com...
Citation Formats
S. Aydoğmuş, “Error concealment in 3d video,” M.S. - Master of Science, Middle East Technical University, 2011.
METU IIS - Integrated Information Service open@metu.edu.tr