Design of cathodic protection for the pipeline to be installed under black sea between Djubga/Russian federation and Samsun/Turkey

Download
082731.pdf
1999
Özkoç, Hasan
Show full item record
143
views
0
downloads
https://hdl.handle.net/11511/2093
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design of a group technology layout for Aselsan mechanical production plant
Arat, Arda; Yağız, Ömer; Department of Business Administration (1995)
Design of a special protection scheme and supplementary controls regarding HVDC back to back interconnection between Turkey and Georgia
Tanıdır, Özgür; Güven, Ali Nezih; Tör, Osman Bülent; Department of Electrical and Electronics Engineering (2014)
HVDC Back-to-Back interconnection between Turkey and Georgia is operational since November 2013. Previous feasibility analysis regarding to this project has shown that depending on the amount of power transfer between parties and loading conditions, there might be transmission bottlenecks and problems observed in Turkish Power System. In this respect, special protection coordination is required to maintain reliable and sustainable operation. In this thesis, design of a special protection scheme that coordin...
DESIGN OF A FRANCIS TURBINE FOR A SMALL HYDRO POWER PROJECT IN TURKEY
Celebioglu, Kutay; Okyay, Gizem; Yildiz, Mehmet (2010-07-24)
Many hydro power plants, both in small and large scales, are being constructed in Turkey. The total potential of these projects reach to 216 billion kWh of feasible energy. However a method was not yet developed for the design of hydraulic machinery equipment in Turkey.
Design of new die holder system for reducing die exchange time on 1000 ton hot forging press
Siddique, Muhammad Ahmad; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2014)
In the forging industry, one of the main challenges is the reduction of setup change time which is non-productive time on the forging press. Long non-productive time reduces efficiency and affects profitability of the forging companies. In this thesis study, firstly setup change activities on the 1000 ton forging press of a forging company are observed and analyzed. With the help of these observations, it is seen that the new die holders with cassette holders and the new cassettes are required to reduce the...
Design of a derotator for the 4 in DAG telescope
Baudet, Jeremie; Jolissaint, Laurent; KESKİN, ONUR; YEŞİLYAPRAK, Cahit; Yerli, Sinan Kaan (2016-06-30)
This paper Silt our work on the design of a field derotator for the adaptive optics instruments platform of DAG (Dogu Anadolu Cozier vi), a new 4 in telescope for astronomical observations near the city of krzurum, l'urkey. While the telescopefollows an astronomical object, its pupil sees a rotation of the object around the optical axis which depends n the telescope geographic coordinate and the object sky coordinate. This effect is called the field rotation. This rotation needs to be compensated during the...
Citation Formats
H. Özkoç, “Design of cathodic protection for the pipeline to be installed under black sea between Djubga/Russian federation and Samsun/Turkey,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr