Purification of magnesium-lead alloy by molten salt electrolysis

Çıtak, Kadir


Characterization of iron oxide thin films prepared by sol-gel processing
Karakuscu, Aylin; Ozenbas, Macit (American Scientific Publishers, 2008-02-01)
Iron oxide thin films were prepared by spin-coating a gel solution of iron(III) nitrate dissolved in 2-methoxyethanol and acetylacetone on glass and quartz substrates. The film thickness was adjusted by changing the spinning rate of the spin coater, Annealing was carried out between 300 degrees C to 600 degrees C to investigate the phases present in the films. Viscosity of the main solution was found as 0.0035 Pa (.) s by viscosity measurement. TGA/DTA analyses showed that heat treatment should be done betw...
Preparation of surfaces of germanium and kovar substrates by electroplating for soldering
Karakaya, İshak; Çetin, Yasin; Demirci, Gökhan (null; 2015-05-01)
Synthesis of silver nanowires through polyol process
Coşkun, Şahin; Ünalan, Hüsnü Emrah; Department of Metallurgical and Materials Engineering (2012)
Nanotechnology enabled synthesis of various shapes and morphologies of conventional materials. Nanotubes, nanoparticles, quantum dots and nanowires are the new form of materials. Especially nanowires have gotten great attention due to their unique physical, chemical and optical properties. Superior properties of nanowires are based on their high surface area and two quantum confinement directions. Silver is one of the most conductive metals and it has the highest thermal conductivity. Due to excellent prope...
Characterization of magnetite thin films produced by sol-gel processing
Eken, Ali Erdem; Özenbaş, Ahmet Macit; Department of Metallurgical and Materials Engineering (2008)
Magnetite (Fe3O4) thin films were prepared by a sol-gel process in which, a solution of iron (III) nitrate dissolved in ethylene glycol was applied on glass substrates by spin coating. Xerogel films were obtained by drying the coated films at 110 °C. The films were sintered between 300 °C and 450 °C in order to observe the phases existing in the films at different temperatures. Coating solution showed Newtonian behaviour and viscosity was found as 0.0215 Pa.s. DTA analysis showed that, sintering temperature...
Characterization of MnAl Magnetic Alloys
Acar, Ozgun; Genc, Merve; Kalay, Ilkay; Kalay, Yunus Eren (null; 2015-03-15)
Citation Formats
K. Çıtak, “Purification of magnesium-lead alloy by molten salt electrolysis,” Middle East Technical University, 1998.