Dip-coating of calcium hydroxy apatite on titanium alloy (Ti-6AI-4V) and stainless steel (316L) substrates

Download
082694.pdf
1999
Maviş, Bora
Show full item record
219
views
332
downloads
https://hdl.handle.net/11511/2097
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Dip coating of calcium hydroxyapatite on Ti-6Al-4V substrates
Mavis, B; Tas, AC (2000-04-01)
Ti-6Al-4V alloy is the most commonly used metallic material in the manufacture of orthopedic implants. The main inorganic phase of human bone is calcium hydroxyapatite (Ca-10(PO4)(6)-(OH)(2), HA). To achieve better biocompatibility with bone, metal implants made of Ti-6Al-4V are often coated with bioceramics. Dip-coating techniques scarcely are used to apply HA onto metallic implants. New dipping-solution recipes to be used for HA coatings are described in this work. Scanning electron microscopy and X-ray d...
Coating of bismuth and carbonate doped hydroxyapatite on acid etched Ti6Al4V via biomimetic method; investigation of mechanical, structural and biological properties
Hacıoğlu, Tuğçe; Evis, Zafer; Aydınol, Mehmet Kadri; Department of Micro and Nanotechnology (2018)
Titanium and its alloys are used in both engineering and dental applications. Ti6Al4V alloy is one of the most commonly preferred titanium alloy used in medical industry. Ti6Al4V with hydroxyapatite (HAp) coating has been frequently used material combinations. Though coating Ti6Al4V with HAp does not provide the desired amount of biocompatibility, it is significant to coat doped HAp on titanium alloy with antibacterial properties. In this thesis, first of all best experimental conditions for pre-treatment a...
Extraction of some transition metals with N,N-dibutyl-N '-benzoylthiourea into molten paraffin at 65 degrees C
Merdivan, M; Gungor, A; Savasci, S; Aygün, Rüveyde Sezer (2000-10-02)
The solid-liquid extraction behaviour of some transition metals (Cu(II), Co(II), Ni(II), Cd(II) and Pb(II)) by the use of N,N-dibutyl-N'-benzoylthiourea as an extractant in paraffin (58-60 degrees C) has been investigated at 65.0 +/- 0.5 degrees C. The effect of equilibration time, pH of the aqueous phase, concentration of extractant and solid solvent used on the extraction efficiency of these metals have been discussed. The interferences of various ions are examined. The method has been applied to the dete...
Enrichment of Scandium Contained in Serpentinite by Attrition Scrubbing Method
Altınsel, Yiğit; Altun, Naci Emre; Topkaya, Yavuz; Atalay, Mustafa Ümit; Şentürk, Bülent (2017-06-01)
Introduction Technological developments and changes in metal market increased the demand for rare earth elements and their importance significantly. In this content, Scandium became substantial as one of the rare earth element, which is commonly used in military, fuel cells and aircraft industry. Geologically, Scandium can be deposited in different formations such as placer deposits and weathered crust elution deposits (ion adsorbed clay deposits). The objective of this study is determining the possibility ...
Extraction of cotton seed oil with hexane in a diffusion battery /
Özcimder, Mustafa; Department of Chemical Engineering (1970)
Citation Formats
B. Maviş, “Dip-coating of calcium hydroxy apatite on titanium alloy (Ti-6AI-4V) and stainless steel (316L) substrates,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr