Effects of some pre-treatment methods on the electrostatic separation of celestite from gypsum

Download
082805.pdf
1999
Uğur, Orkun
Show full item record
71
views
0
downloads
https://hdl.handle.net/11511/2148
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effects of synthesis and doping methods on thermoluminescence glow curves of manganese doped lithium tetraborate
Kayhan, Mehmet; Yılmaz, Ayşen; Department of Chemistry (2009)
In this study, differences in glow curves of Mn doped LTB powder samples synthesized with solid and wet synthesis methods and doped by using solid and wet doping techniques were investigated. Firstly, LTB was synthesized by using wet synthesis method which mainly comprises dissolution of reactants in water as solvent. Second way to produce LTB which was used in this study was solid synthesis method. In solid synthesis method, reactants were mixed in powder form. In the second part of the study, LTB produced...
Effects of Fe-tib2 addition on the liquid phase sintering of behavior of tungsten carbide cermets
Tankut, Aydın; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2003)
Effects of Fe-TiB2 addition as binder phase on the liquid phase sintering behaviour of tungsten carbide cermets
Tankut, A; Timucin, M (2004-01-01)
The sintering behaviour of tungsten carbide compacts with a eutectic Fe-TiB2 mixture was studied. In order to have a clear view of the mechanisms that occur during liquid phase sintering, the hardness, transverse rupture strength, toughness, and densification values were measured and the micrographs were examined for WC-Fe-TiB2 cermets with varying compositions, sintering times and sintering temperatures. The findings were then with the propeerties known for WC-Fe and WC-Co cermets.
EFFECTS OF FIELD PLATE ON THE MAXIMUM TEMPERATURE AND TEMPERATURE DISTRIBUTION FOR GaN HEMT DEVICES
Kara, Dogacan; Donmezer, Nazli; Canan, Talha Furkan; ŞEN, ÖZLEM; ÖZBAY, Ekmel (2016-07-14)
Field plated GaN high electron mobility transistors (HEMTs) are widely preferred amongst other GaN HEMT devices because of their ability to regulate electric field at high power densities. When operated at high power densities, GaN HEMTs suffer significantly from the concentrated heating effects in a small region called hotspot located closer to the drain edge of the gate. Although; the stabilizing effect of field plate on the electrical field distribution in HEMTs is known by researchers, its effect on tem...
Effects of Halloysite Nanotubes on the Performance of Plasticized Poly(lactic acid)-Based Composites
Erpek, Canan Esma Yeniova; ÖZKOÇ, GÜRALP; Yılmazer, Ülkü (Wiley, 2016-11-01)
The objective of this study is processing and characterization of Halloysite nanotube (HNT)/poly(lactic acid) (PLA) nanocomposites. As HNT filler, a domestic source was used (ESAN HNT). The results obtained from this HNT were compared with a well-known reference HNT (Nanoclay HNT). To achieve the desired physical properties and clay dispersion, composites were compounded via direct melt mixing in a laboratory twin-screw compounder. However, the constituents were observed to be incompatible without a compati...
Citation Formats
O. Uğur, “Effects of some pre-treatment methods on the electrostatic separation of celestite from gypsum,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr