Use of ferrate for disinfection and treatment of waters

1998
Karaatlı, H. Tülin

Suggestions

Use of calcium alginate as a coagulant in water treatment
Çoruh, Hale Aylin; Sanin, Faika Dilek; Department of Environmental Engineering (2005)
Coagulation and flocculation processes are important parts of water and wastewater treatment. Coagulation or destabilization of colloidal suspensions results in aggregation of colloidal particles by physical and chemical processes. Flocculation results in the formation of larger and settleable structures by bridging. Alginate, a polysaccharide obtained from marine brown algae, produces a gel structure when mixed with calcium ions, which is expected to be a potential coagulant in water treatment. This study ...
Use of calcium-alginate as a coagulant for low turbidity waters
Yüksel, Avni Mete; Sanin, Faika Dilek; Department of Environmental Engineering (2007)
This study aims to investigate the possibility of using calcium-alginate as a coagulant in low turbidity waters. Jar tests were initially performed with synthetically prepared turbid waters to investigate the effect of alginate and calcium concentrations, alginate’s molecular weight, rapid mixing time and speed (schedule), initial pH and alkalinity of synthetic water on turbidity removal efficiency of calcium-alginate system step by step. Alum as a coagulant was then used in jar tests conducted with synthet...
USE OF BORIC ACID AS A BINDER FOR BRIQUETTING SOME BORON MINE WASTES AND THEIR CALCINED PRODUCTS
ŞENER, SAVAŞ; ÖZBAYOĞLU, GÜLHAN; Ozdemir, Zeynep (2010-01-01)
In this study, boric acid as a binder for briquetting some boron mine wastes, such as colemanite and ulexite fines and calcined products, which do not meet the market specifications with respect to particle size, were investigated. Effects of water and binder contents, applied pressure, and curing and drying conditions on the briquette quality were evaluated in terms of mechanical strength, water-proofing characteristics and wearing resistance. The best briquettes were obtained at 62.4 MPa pressure (cured a...
Use of laboratory-grown bacterial alginate in copper removal
Moral, C. Kivilcimdan; Doğan, Özdemir; Sanin, Faika Dilek (IWA Publishing, 2012-01-01)
Industrial production leads to toxic heavy metal pollution in water bodies. Copper is one of the examples that requires removal from effluents before being discharged. It is difficult and sometimes very expensive to remove toxic heavy metals by conventional treatment techniques. This study aims to remove copper by the use of bacterial alginate as a non-conventional technique. Bacterial alginates (natural polymers composed of mannuronic and guluronic acid monomers) were synthesized by Azotobacter vinelandii ...
Use of boron waste as an additive in red bricks
Uslu, T; Arol, Ali İhsan (Elsevier BV, 2004-01-01)
In boron mining and processing operations, large amounts of clay containing tailings have to be discarded. Being rich in boron, the tailings do not only cause economical loss but also pose serious environmental problems. Large areas have to be allocated for waste disposal. In order to alleviate this problem, the possibility of using clayey tailings from a borax concentrator in red brick manufacturing was investigated. Up to 30% by weight tailings addition was found to improve the brick quality.
Citation Formats
H. T. Karaatlı, “Use of ferrate for disinfection and treatment of waters,” Middle East Technical University, 1998.