Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Experimental investigations on the performance characteristics of photo-galvanic and photo-electrochemical solar cells
Download
075637.pdf
Date
1998
Author
Bayer, İlker S
Metadata
Show full item record
Item Usage Stats
48
views
0
downloads
Cite This
URI
https://hdl.handle.net/11511/2168
Collections
Graduate School of Natural and Applied Sciences, Thesis
Suggestions
OpenMETU
Core
Experimental investigation for mechanical properties of filament wound composite tubes
Erdiller, Emrah Salim; Parnas, Kemal Levend; Department of Mechanical Engineering (2004)
Experimental Investigation of Crack Propagation Mechanisms in Commercially Pure Aluminium Plates
Tekoğlu, C.; Çelik, Ş.; Duran, H.; Efe, M.; Nielsen, K.L. (Elsevier BV; 2019)
The crack surface morphology in tearing of ductile metal plates depends on the mechanical properties, chemical composition and the microstructure of the plate material as well as on the loading conditions and the specimen geometry. This study assesses the crack surface morphologies observed in commercially pure aluminium plates (Al 1050 H14). Mode I tearing was performed in both single and double edge notched tensile test setups with specimens cut from five different plates with different thickness t, viz. ...
Experimental investigation of the effect of bends on the forced convection heat transfer in pipes.
Özgü, Mustafa Ragıp; Department of Mechanical Engineering (1968)
Experimental investigation on machining parameters in wire electrical discharge machining (Wire E.D.M).
Ardalı, Ahmet Tanju; Department of Mechanical Engineering (1985)
Experimental insight into the performance characteristics of Ni-mesh semiconductor photo-electrochemical cells
Bayer, I; Eroğlu, İnci; Turker, L (Elsevier BV, 2000-04-15)
The performance characteristics of two photo-electrochemical cells with different cell configurations were investigated at 25 degrees C and within the illumination range of 70-100 W/m(2). These cells included a jacketed single cell (JSC) and a jacketed two-compartment cell (JTC). Ni-mesh was used as a counter electrode and as a backing material for semiconductor electrodes. Semiconductor electrodes were prepared by silk-screen painting technique using TiO2, WO3, PbO, Sb2S3, ZnO, Al2O3 or CuO powder mixed wi...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
İ. S. Bayer, “Experimental investigations on the performance characteristics of photo-galvanic and photo-electrochemical solar cells,” Middle East Technical University, 1998.