Development of a CAD/CAM program for milling machines

Download
075887.pdf
1998
Boz, Ozan
Show full item record
68
views
0
downloads
https://hdl.handle.net/11511/2197
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Development of a tool management system for a job shop
Budak, Başar ; Kılıç, S. Engin; Department of Mechanical Engineering (2003)
A tool management system for a job shop was developed in this study. The system is based on the rules of the plant of Türk Traktör ve Ziraat Makineleri A.S. in Ankara. An object-oriented methodology was used during the system development. Unified Modeling Language (UML), which is the standard diagramming notation for object-oriented development, is used to model the system. Entity-Relation (E-R) modeling is used during the construction of the database. System was developed using three-tiered Microsoft Windo...
Development of a micro-fabrication process simulator for micro-electro-mechanical systems(mems)
Yıldırım, Alper; Dölen, Melik; Department of Mechanical Engineering (2005)
The aim of this study is to devise a computer simulation tool, which will speed-up the design of Micro-Electro-Mechanical Systems by providing the results of the micro-fabrication processes in advance. Anisotropic etching along with isotropic etching of silicon wafers are to be simulated in this environment. Similarly, additive processes like doping and material deposition could be simulated by means of a Cellular Automata based algorithm along with the use of OpenGL library functions. Equipped with an inte...
Development of a computer program for friction winding system design
Ünal, Fuat Gökhan; Bölükbaşı, Naci; Department of Mining Engineering (2011)
As the trend to deeper mines continues, mine hoists and associated equipment will become more sophisticated, complex, large and expensive. Correct selection of the right type of hoist is imperative. In this vital link between underground and surface, crude estimates of hoist capacity are not good enough, and the mining engineer must design and select the right hoisting system to meet the design specifications and establish the most suitable operating parameters. This study aims to constitute a software mode...
Development of a Computer-Aided Dragline Selection Program
Demirel, Nuray (2018-03-22)
Selection of appropriate machine and equipment is one of the most critical tasks required in surface mining. Since draglines are massive and expensive machines, their selection is of paramount concern to mining engineers and decision makers. The selection of appropriate dragline model requires simultaneous consideration of various parameters, such as geological properties of overburden material, stripping method, available fund, and technology. Therefore, this is a complex and time-consuming process. In thi...
Development of a computer-aided dragline selection program
Akhundov, Sayid; Demirel, Nuray; Department of Mining Engineering (2017)
Selection of appropriate machine and equipment is one of the most critical tasks required in surface mining. Since draglines are massive and expensive machines, their selection is of paramount concern to mining engineers and decision makers. The selection of appropriate dragline model requires simultaneous consideration of various parameters, such as geological properties of overburden material, stripping method, available fund and technology. Therefore, this is a complex and time-consuming process. In this...
Citation Formats
O. Boz, “Development of a CAD/CAM program for milling machines,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr