Thermal, physical, and curing characteristics of GAP based binders

Download
082657.pdf
1999
Kaşıkçı, Hüsnü
Show full item record
51
views
0
downloads
https://hdl.handle.net/11511/2260
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Thermal and mechanical properties of Cu-Au intermetallic alloys
Kart, HH; Tomak, Mehmet; Cagin, T (IOP Publishing, 2005-07-01)
The thermal and mechanical properties of Cu, Au pure metals and their ordered intermetallic alloys of Cu3Au(L1(2)), CuAu(L1(0)) and CuAu3(L1(2)) are studied by using the molecular dynamics simulation. The effects of temperature and concentration on the physical properties of CuxAu1-x, are analysed. Sutton-Chen (SC) and quantum Sutton-Chen (Q-SC) many-body potentials are used. The simulation results such as cohesive energy, density, elastic constants, bulk modulus, heat capacity, thermal expansion, melting p...
Thermal and mechanical properties of hydroxyapatite impregnated acrylic bone cements
Serbetci, K; Korkusuz, F; Hasırcı, Nesrin (2004-04-01)
Improvement of mechanical, thermal and biological properties of acrylic-based bone cements by adding various chemicals is a novel research area. Among these additives, hydroxyapatite (HA) is proven to be a biocompatible and osteoconductive material and it strongly integrates with bone. In this study, HA-containing acrylic bone cements were prepared and thermal and mechanical properties of the resultant cements were examined.
Thermal and structural characterization of polypyrrole by direct-insertion probe pyrolysis mass spectrometry
Uyar, T.; Toppare, Levent Kamil; Hacaloğlu, Jale (2001-03-15)
There have been extensive studies on structural characterization of conducting polypyrrole, PPY using various techniques. The two proposed structures are the aromatic form corresponding to the undoped state and the quinoid form corresponding to the doped state. However, actual structure appears to be more complicated and the relationship between the dopant used and the structure was not totally clarified. In this study direct insertion probe pyrolysis mass spectrometry technique was applied to monitor therm...
Thermal and mechanical properties of rocket motor liners
Benli, Salih; Yılmazer, Ülkü; Özkar, Saim; Department of Chemical Engineering (1997)
Rocket motor liners are usually chosen from filled elastomers. The primary function of the liner layer is to bind the propellant grain to the motor case. A rocket motor liner also serves as a thermal insulator and burning inhibitor during the operation of the rocket motor. The primary objective of this study was to make thermal and mechanical characterization of polyurethane based rocket motor liners, and develop new liner compositions with optimum thermal, mechanical and processing properties. In the first...
Thermal and dynamic mechanical properties of gamma-ray-cured poly(methyl methacrylate) used as a dental-base material
Usanmaz, Ali; Eser, O; Dogan, A (Wiley, 2001-08-01)
In this study, gamma rays were used for the first time to cure dental-base material. The effect of the radiation dose on the thermal and theological properties of poly(methyl methacrylate) (PMMA) used as a dental-base material was investigated. The commercial powder and liquid material (heat-curing-grade) were mixed and polymerized at 60 and 70 degreesC in a constant-temperature water bath for 30 min and then were cured by gamma rays, with total doses of 7.5, 15, 22.5, 30, 45, 52.5, 360, and 2160 krad. For ...
Citation Formats
H. Kaşıkçı, “Thermal, physical, and curing characteristics of GAP based binders,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr