Modeling of tunnel form buildings by equivalent frame method

Download
082607.pdf
1999
Ghuneim, Naseim
Show full item record
110
views
0
downloads
https://hdl.handle.net/11511/2306
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

MODELING OF DYNAMIC DELAMINATION IN L-SHAPED COMPOSITE BRACKETS
Gozluklu, Burak; Çöker, Demirkan (2012-11-15)
One of the widely used geometrically complex parts in recent civil passenger aircrafts is the L-shaped composite brackets connecting ribs to skins. Due to the sharp curved geometry, interlaminar opening stresses are induced and delamination occurs under considerable mode-mixities at the corner. Dynamic phenomena during delamination initiation and propagation of L-shaped beams are investigated using dynamic (explicit) finite element analysis in conjunction with cohesive zone methods (CZM). In ABAQUS a sequen...
Modeling of surge and swab pressure of yield power law fluids
Erge, Öner; Akın, Serhat; Gücüyener, İsmail Hakkı; Department of Petroleum and Natural Gas Engineering (2016)
A mathematical modeling work and computational fluid dynamics (CFD) analysis of surge and swab pressures in concentric annuli is conducted. A commercial CFD package is used to validate the developed model of the flow during surge and swab in concentric annuli. Developed mathematical model incorporates the Yield Power Law (YPL) fluid behavior for closed-end pipes under laminar flow conditions. The results of the mathematical model and CFD analysis is compared with the models from literature. CFD analysis is ...
Modeling of radiative heat transfer in freeboard of a 0.3 MW AFBC test rig using zone method of analysis
Batu, Aykan; Selçuk, Nevin; Department of Chemical Engineering (2001)
Modeling of Soft Tissue Mechanical Behavior on Computer
Tönük, Ergin (null; 2009-10-31)
Modeling of an electromagnetic launcher
Çevik, Yasin; Sevaioğlu, Osman; Department of Electrical and Electronics Engineering (2015)
This thesis involves modeling of an electromagnetic launcher (EML) by taking all of the variables that affect the system performance into consideration. The study includes deriving related electrical and kinematic equations and developing models based on these equations. Two models are built in different simulation programs to be able to analyze the system from different aspects. Models are verified by means of experimental results. An experimental setup is designed and implemented to represent a similar be...
Citation Formats
N. Ghuneim, “Modeling of tunnel form buildings by equivalent frame method,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr