Reactive blending of particle poly(ethylene terephthalate) with high density polyethylene

Download
093404.pdf
2000
Diblen Gökten, Feray
Show full item record
65
views
0
downloads
https://hdl.handle.net/11511/2644
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Reactive extrusion of poly(ethylene terephthalate)-(ethylene/methyl acrylate/glycidyl methacrylate)-organoclay nanocomposites
Alyamac, Elif; Yılmazer, Ülkü (Wiley, 2007-04-01)
This study was conducted to investigate the effects of component concentrations and addition order of the components on the final properties of ternary nanocomposites composed of poly(ethylene terephthalate), organoclay, and an ethylene-methyl acrylate-glycidyl methacrylate (E-MA-GMA) terpolymer acting as an impact modifier for PET. In this context, first, the optimum amount of the impact modifier was determined by melt compounding binary PET-terpolymer blends in a corotating twin-screw extruder. The amount...
Reactive extraction of pyruvic acid from aqueous single and mixed acid solutions
Martı, Mustafa Esen; Gürkan, Türker; Department of Chemical Engineering (2010)
Interest in recovery of carboxylic acids from their aqueous solutions and production media has been growing with the improvements in the production techniques. Reactive extraction is proposed as a promising method to achieve high distribution coefficients with good selectivity. In the present study, equilibrium and kinetic studies, needed for the design of a recovery unit were carried out. Reactive extraction of pyruvic, acetic and lactic acids from their single and mixed acid solutions were carried out wit...
Reactive processing of styrene-maleic anhydride and epoxy functionalized polymer blends
Bayram, G; Yılmazer, Ülkü; Xanthos, M (1999-05-06)
The reaction of styrene-maleic anhydride (SMA) with polyethylene/methyl acrylate/glycidyl methacrylate (E-MA-GMA) was studied in a batch mixer and in a corotating twin screw extruder. Also, the mixing of a nonreactive blend of SMA with polyethylene/methyl acrylate (E-MA), with similar rheological properties to E-MAG-MA, was studied under the same processing conditions. The mixing products of reactive and nonreactive systems exhibited drastically different properties. Reactive blends showed higher tensile mo...
Reactive extrusion of styrene maleic anhydride copolymer and polyol blends
Bayram, G; Yılmazer, Ülkü; Xanthos, M (1998-04-30)
The reaction of styrene-maleic anhydride with a low molecular weight polytetramethylene ether glycol was studied in an intensive batch mixer and in a corotating twin screw extruder. The reaction mixtures were later compression molded in the form of films. The films analyzed by FTIR spectroscopy showed the presence of both carboxylic acid and ester groups. Physical and mechanical properties of the materials were evaluated at different reactive processing conditions. The glass transition temperature of the mi...
Reactive processing and characterization of anhydride/hydroxyl and anhydride/epoxy functionalized blends
Bayram, Göknur; Yılmazer, Ülkü; Department of Chemical Engineering (1999)
Citation Formats
F. Diblen Gökten, “Reactive blending of particle poly(ethylene terephthalate) with high density polyethylene,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr