Non-destructive determination of graphite morphology, nodularity and matrix phases in nodular cast irons by ultrasonic techniques

Download
093178.pdf
2000
Aydınmakina, Birant
Show full item record
64
views
0
downloads
https://hdl.handle.net/11511/2661
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Non-destructive determination of residual stress state in steel weldments by Magnetic Barkhausen Noise technique
Yelbay, Hasan İlker; Çam, İbrahim; Gür, Cemil Hakan (2010-01-01)
The purpose of this study is non-destructive determination of residual stresses in the welded steel plates by Magnetic Barkhausen Noise (MBN) technique. A MBN-stress calibration set-up and a residual stress measurement system with scanning ability were developed. To control the accuracy and the effectiveness of the developed system and procedure, various MBN measurements were carried out. The MBN results were verified by the hole-drilling method. Microstructural investigation and hardness measurements were ...
NON-LINEAR ANALYSIS OF TUNNEL LININGS UNDER LONGITUDINAL BENDING
Sucuoğlu, Haluk (1989-06-01)
Tunnel linings are generally analysed transversally as a plane strain problem. Very little attention is given to the flexural behaviour which may occur in the longitudinal direction as a result of settlements along the tunnel. Longitudinal bending is ignored, on the assumption that the settlement will be small and that the linings possess suficient flexibility to cope with the settlements without producing high stresses. This Paper presents an analytical study of the flexure-induced deformations and stresse...
Non-Destructive Determination of Surface Residual Stresses in the Carburized SAE 8620 Steel Components
Kaleli, Tuğçe; Gür, Cemil Hakan (2018-12-26)
Management of the residual stress state has critical importance for fatigue life of the carburized steel components. The conventional methods of residual stress measurement are either destructive or have limited ability for in-situ measurement or take considerable time. Hence, there is a need for rapid, practical and reliable non-destructive method for measurement of residual stress. The aim of this study is to investigate the efficiency of the magnetic Barkhausen noise (MBN) method for evaluation of the su...
Non-linear analysis of concrete tunnel lining, in Cohesionless soils.
Torun, Bulent; Department of Civil Engineering (1979)
Non-destructive Monitoring of Salt Weathering in Dolostone
Tavukçuoğlu, Ayşe; Erol, Fatıma; Çetin, Özlem; Karahan Dağ, Fulya (2017-05-15)
Citation Formats
B. Aydınmakina, “Non-destructive determination of graphite morphology, nodularity and matrix phases in nodular cast irons by ultrasonic techniques,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr