Post regulation methods in multiple output SMPS and implementation of a two-output forward converter with syncronous switch post regulator.

Download
093103.pdf
2000
Baran, Murat
Show full item record
92
views
0
downloads
https://hdl.handle.net/11511/2676
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Post-extrusion heat-treatment as a facile method to enhance the mechanical properties of extruded xylan-based polymeric materials
AKKUS, Merve; BAHÇEGÜL, Erinc; Özkan, Necati; Bakir, Ufuk (2014-01-01)
Hemicelluloses are among the most abundant renewable polymers in nature, and their processing into biodegradable polymeric materials via extrusion was recently reported as a novel alternative technique for solvent casting. A simple heat-treatment step conducted after the extrusion of corn cob xylans was found to enhance the mechanical properties of strips by altering their moisture absorption behavior. Depending on the heat-treatment temperature, which varied between 60 degrees C and 150 degrees C, xylan- b...
Post processing for wavelet domain HMT image resolution enhancement
Temizel, Alptekin (2007-06-13)
Wavelet domain image resolution enhancement algorithms assume that the available image is the low-frequency subband of a higher resolution image and high-frequency subbands are not available. Then, these high-frequency coefficients are estimated and the higher resolution image is generated by application of inverse wavelet transform. Some of these techniques have used probabilistic methods and utilisation of HMT (Hidden Markov Tree) was shown to produce promising results. HMT based methods model the wavelet...
Post Buckling Load Redistribution of Stiffened Panels in Aircraft Wingbox Structures
Mert, Mesut; Kayran, Altan (null; 2016-01-04)
Post-annealing Temperature Effect on Electrical Properties of Al2O3 Films on Silicon by Atomic Layer Deposition for Solar Cell Applications
Dönerçark, Ergi; İmer, Muhsine Bilge; Turan, Raşit (2018-11-25)
Silicon wafers, being the most dominant and almost inevitable material for solar cell production, require surface passivation to increase the solar cell efficiency by decreasing recombination losses. For this reason, several research groups are currently focused on the usage of thin alumina (Al2O3) as a passivation layer. The success of Tunnel Oxide Passivating CONtact (TOPCon) solar cell, Passivated Emitter Rear Totally diffused (PERT) solar cell and Passivated Emitter Rear solar cell (PERC) structures dem...
Post-cyclic settlement and tilting potential of mat foundations
UNUTMAZ, BERNA; Çetin, Kemal Önder (2012-12-01)
A simplified procedure for the estimation of cyclic shear stresses on foundation soil layers due to interactions of seismic excitation, foundation mat and overlying structural system, incorporating both kinematic and inertial aspects was described earlier in Cetin et al. 11,2]. This simplified procedure is now used, along with laboratory-based cyclic shear and volumetric strain relationships for the assessment of cyclically induced settlement and tilting potential of mat foundations. The proposed methodolog...
Citation Formats
M. Baran, “Post regulation methods in multiple output SMPS and implementation of a two-output forward converter with syncronous switch post regulator.,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr