Lateral resistance of a rigid socketed single model pile, fixed at head, in a cohesionless soil

Download
090653.pdf
1999
Analay, Bülent
Show full item record
126
views
0
downloads
https://hdl.handle.net/11511/2762
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Lateral stiffness of steel plate shear wall systems
Topkaya, Cem (Elsevier BV, 2009-08-01)
The accuracy of the finite element method and strip method of analysis for calculating the lateral stiffness of steel plate shear wall (SPSW) systems is assessed by making comparisons with experimental findings. Comparisons revealed that while both methods provide acceptable accuracy, they also require the generation of sophisticated computer models. In this paper, two alternative methods are developed. The first one is an approximate hand method based on the deep beam theory. The classical deep beam theory...
Lateral Response Comparison of Unbonded Elastomeric Bearings Reinforced with Carbon Fiber Mesh and Steel
Naghshineh, Ali Karimzadeh; Akyüz, Uğurhan; Caner, Alp (2015-01-01)
The vertical and horizontal stiffness used in design of bearings have been established in the last few decades. At the meantime, applicability of the theoretical approach developed to estimate vertical stiffness of the fiber-reinforced bearings has been verified in different academic studies. The suitability of conventional horizontal stiffness equation developed for elastomeric material, mainly for steel-reinforced elastomeric bearings, has not been tested in detail for use of fiber-reinforced elastomeric ...
Lateral buckling of overhanging crane trolley monorails
Ozdemir, Kerem Murat; Topkaya, Cem (Elsevier BV, 2006-07-01)
Lateral torsional buckling should be taken into account during the design of overhanging steel beams. One special type of overhanging beam is the crane trolley monorail. Lateral buckling of overhanging monorails under idealized loading and boundary conditions has been studied in the past using classical mathematical procedures. This paper aims to present a detailed investigation of overhanging monorails using finite element analysis. Effects of different loading and boundary conditions were studied in detai...
Lateral Load Testing of Two Masonry Buildings
Binici, Barış; Canbay, Erdem; Yakut, Ahmet (2015-08-25)
Lateral stiffness of unstiffened steel plate shear wall systems
Atasoy, Mehmet; Topkaya, Cem; Department of Civil Engineering (2008)
Finite element method and strip method are two widely used techniques for analyzing steel plate shear wall (SPSW) systems. Past research mostly focused on the prediction of lateral load capacity of these systems using these numerical methods. Apart from the lateral load carrying capacity, the lateral stiffness of the wall system needs to be determined for a satisfactory design. Lateral displacements and the fundamental natural frequency of the SPSW system are directly influenced by the lateral stiffness. In...
Citation Formats
B. Analay, “Lateral resistance of a rigid socketed single model pile, fixed at head, in a cohesionless soil,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr