Effect of curing on the undrained shear strength of compacted clays

Download
093392.pdf
2000
Gürol, Alp
Show full item record
132
views
0
downloads
https://hdl.handle.net/11511/2778
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effect of irradiation damage on the shear strength of Cu-Nb interfaces
MAO, Shimin; Özerinç, Sezer; King, William P.; Averback, Robert S.; Dillon, Shen J. (2014-11-01)
The influence of irradiation-induced damage on the interfacial shear strength of Cu-Nb interfaces was characterized via compression of nanolaminate pillars performed in situ in a transmission electron microscope. Chemical mixing and interfacial roughening during MeV Kr ion irradiation leads to increased interfacial shear strength by as much as 60%, from 0.6 GPa for the as-deposited material to 0.95 GPa for samples irradiated at liquid nitrogen temperature. The increase in interfacial shear strength was most...
Effect of Delamination on the Strength of Laminated Glass Plate Structures
Aşık, Mehmet Zülfü (2014-01-01)
Effect of Delamination on the Strength of Laminated Glass Plate Structures
Aşık, Mehmet Zülfü (2013-11-17)
Laminated glass which consists of two glass sheets connected to each other with PVB interlayer is used in many engineering applications for years. Despite the long history of the use of laminated glass in buildings there are serious problems about delamination of laminated glass units. This paper provides information about delamination issues of laminated glass plate structures. Delamination of laminated glass unit may be due to the thinning of PVB (Polyvinyl Butyral) interlayer or the folds which occur dur...
Effect of Alloying Additions on the Fracture Behaviour of the Iron Aluminides
Mehrabov, Amdulla; Akdeniz, Mahmut Vedat (1995-09-01)
EFFECT OF OUT-OF-AUTOCLAVE CURING ON THE BENDING STRENGTH OF TPNCF AND UNIDIRECTIONAL LAMINATES
Bozkurt, Mirac Onur; Bilge, Kaan; Papila, Melih; Çöker, Demirkan (null; 2017-09-20)
Out-of-autoclave(ooA)treatments in composite manufacturing draw the attention ofmanufacturers anddesigners in aerospace industry by offering numerous advantages over the traditional autoclave processing. Besides, thin ply non crimp fabric (TPNCF) architecture is proven for improved delamination resistance and fracture toughness. The objective of the study is comparingthe bending strength of flat and curved beams of TPNCF [0/45] and Unidirectional (UD)[0/45] aut...
Citation Formats
A. Gürol, “Effect of curing on the undrained shear strength of compacted clays,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr