Active noise control: applications on a headset and a duct

Download
093396.pdf
2000
Güner, Erdinç
Show full item record
97
views
0
downloads
https://hdl.handle.net/11511/2823
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Active clamp/reset forward converter with ZCS/ZVS self-driven synchronous rectifier for low output voltage applications
Benlier, Emre; Çadırcı, Işık; Department of Electrical and Electronics Engineering (2000)
Active vibration control of a smart beam : a spatial approach
Kırcalı, Ömer Faruk; Yaman, Yavuz; Department of Aerospace Engineering (2006)
This study presented the design and implementation of a spatial Hinf controller to suppress the free and forced vibrations of a cantilevered smart beam. The smart beam consists of a passive aluminum beam with surface bonded PZT (Lead-Zirconate-Titanate) patches. In this study, the PZT patches were used as the actuators and a laser displacement sensor was used as the sensor. In the first part of the study, the modeling of the smart beam by the assumed-modes method was conducted. The model correction techniqu...
Active control of the tip vortex: an experimental investigation on the performance characteristics of a model turbine
Anik, E.; Abdulrahim, A.; Ostovan, Y.; Mercan, B.; Uzol, Oğuz (2014-06-20)
This study is part of an on-going experimental research campaign that focuses on the active control of the tip leakage/vortex characteristics of a model horizontal axis wind turbine rotor using tip injection. This paper presents both baseline (no-injection) data as well as data with tip injection, concentrating on the effects of tip injection on power and thrust variations with the Tip Speed Ratio (TSR). The experiments are conducted by placing a specially designed 3-bladed model wind turbine rotor at the e...
Active Compliance Control Structure Design for a Robotic Grinding Machine Using a Piezo Actuator
Dönder, Abdülhamit; Konukseven, Erhan İlhan (null; 2016-07-12)
Active motor damping strategy for driveline vibrations of a hybrid electric vehicle during ABS operation
Bayar, Kerem (2022-01-01)
Torsional drivetrain vibrations in hybrid and electric drivetrains, which occur during traction and braking control, are commonly encountered. This problem occurs mainly due to the weak damping characteristic of the hybrid/electric drivetrain and the fast time response characteristics of the electric motor. An active motor damping (AMD) control algorithm for a hybrid electric vehicle, considering ABS braking maneuvers on different road conditions, is developed in this work. The control problem is structured...
Citation Formats
E. Güner, “Active noise control: applications on a headset and a duct,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr