Seismic capacity design investigation of tunnel form buildings

Download

093017.pdf

Date

2000

Author

Demiroğlu, Müjdat

Metadata

Show full item record

Item Usage Stats

82
views

0
downloads

URI

https://hdl.handle.net/11511/2864

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Seismic behavior of tunnel form buildings - preliminary studies by photoelasticity Sevil, Tuğçe; Tankut, Tuğrul; Department of Civil Engineering (2001)
Seismic performance of gravity-load designed concrete frames infilled with low-strength masonry Siddiqui, Umair A.; Sucuoğlu, Haluk; Yakut, Ahmet (2015-01-01) This study compares the seismic performances of two reinforced concrete frame specimens tested by the pseudo-dynamic procedure. The pair of 3-storey, 3-bay frames specimens are constructed with typical characteristics of older construction which is lacking seismic design. One of the specimens is a bare frame while the other is infilled with low-strength autoclave aerated concrete (AAC) block masonry. The focus of this study is to investigate the influence of low strength masonry infill walls on the seismic ...
Seismic performance evaluation of reinforced concrete frames infilled with autoclave aerated concrete masonry Siddiqui, Umair Ahmed; Sucuoğlu, Haluk; Yakut, Ahmet; Department of Earthquake Engineering and Engineering Seismology (2013) Seismic risk reduction requires detailed assessment and rehabilitation of vulnerable buildings to avoid significant property and life losses. Several reinforced concrete buildings are deficiently designed and constructed and also contain non-engineered unreinforced masonry infill panels which dominate the seismic response and impart excessive lateral forces for which they are not designed for. Therefore, seismic performance assessment procedures recommended in guidelines and codes needs detailed examination...
Seismic Risk Prioritization and Retrofit Cost Evaluation of Code-Deficient RC Public Buildings in Turkey Sucuoğlu, Haluk; Yakut, Ahmet (SAGE Publications, 2015-02-01) A risk prioritization procedure is developed for deficient concrete public buildings within the scope of a seismic risk reduction program. The main purpose is identifying public buildings with high damage risk in a region for efficient retrofit investments. Regularity of structural systems and repeatability of deficiencies in public buildings provide opportunities for developing simple and reliable assessment procedures. The proposed procedure is based on calculating a risk index from the comparison of late...
Seismic design of buried pipelines Ertuğrul, Tuğrul; Yahşi, O. Selçuk; Department of Mechanical Engineering (1994)

Citation Formats

M. Demiroğlu, “Seismic capacity design investigation of tunnel form buildings,” Middle East Technical University, 2000.