Arcan Fehmi Dericioğlu

E-mail

arcan@metu.edu.tr

Department

Department of Metallurgical and Materials Engineering

ORCID

0000-0003-3797-117X

Scopus Author ID

6602975604

Web of Science Researcher ID

AAC-3937-2019

Investigations on the effect of secondary treatments on Ti48Al2Cr2Nb alloy manufactured by electron beam powder bed fusion method Bilgin, Guney Mert; Ozer, Seren; Davut, Kemal; Esen, Ziya; Dericioğlu, Arcan Fehmi (2025-12-01) As-built Ti48Al2Cr2Nb alloy samples produced by electron beam powder bed fusion (PBF-EB) exhibited notable brittleness. The low ductility was attributed to coarse γ bands aligned perpendicular to the building and tensile d...
Influence of the heat treatment on the microstructure, mechanical and high-temperature oxidation behavior of Hastelloy X alloy fabricated via laser powder bed fusion Ozer, Seren; Yalçın, Mustafa Alp; Bilgin, Güney Mert; Davut, Kemal; Esen, Ziya; Dericioğlu, Arcan Fehmi (2025-01-25) The effect of building direction and heat treatment on the microstructure, mechanical properties, and high-temperature oxidation behavior of Hastelloy X (HX) alloy fabricated by the laser powder bed fusion (L-PBF) method w...
High Temperature Tensile Properties of TiN-Reinforced 17-4 PH Stainless Steel Produced by Laser Powder-Bed Fusion Ozsoy, Andac; Aydoğan Güngör, Eda; Dericioğlu, Arcan Fehmi (2025-01-01) In this study, the effect of TiN particle reinforcements on high temperature tensile behavior of laser powder-bed fusion processed 17-4 PH stainless steel has been investigated. Tensile tests have been conducted at room te...
Effect of microwave heating on the interdiffusion in BaTiO3–SrTiO3 binary ceramic system Süer, Başar; Dericioğlu, Arcan Fehmi (2024-04-15) An investigation on the effect of microwave heating (2.45 GHz) on the interdiffusion process was carried out and compared with conventional heating for BaTiO3–SrTiO3 binary system in the temperature range of 1200–1400 °C. ...
Fabricating X-Band Frequency Selective Surface on Glass Fabric by Screen Printing Method Ersan, Tugce Altuntop; Birer, Ozgur; Dalkilic, Akin; Inal, M. Erim; Dericioğlu, Arcan Fehmi (2024-01-01) Frequency selective surfaces (FSS), periodic metallic patterns on radiotransparent materials, are used to decrease radar cross section (RCS) of a radiating structure by allowing the transmittance of signals of the desired ...
Functionalization of glass fiber woven fabrics by indium tin oxide (ITO) coatings for electromagnetic wave absorption Daricioglu, Merve Ozdil; Durucan, Caner; Dericioğlu, Arcan Fehmi (2023-08-01) The effects of surface electrical conductivity and cascading order of ITO surface modified glass fiber woven fabrics (GFWF) on the electromagnetic (EM) behavior of hybrid type multilayered absorber structure were investiga...
A Comparative Study of Effects of Additive Particle Size and Content on Wetting Behavior and Brazing Performance of C/SiC Composite Saltik, Simge; ESEN, ZİYA; Dericioğlu, Arcan Fehmi (2022-10-01) This study has focused on the influence of size and content of SiC particle incorporation on the wetting behavior of the Ticusil brazing filler alloy and on its brazing performance in C/SiC composite/Ti6Al4V alloy joints. ...
Effect of post fabrication aging treatment on the microstructure, crystallographic texture and elevated temperature mechanical properties of IN718 alloy fabricated by selective laser melting Ozer, Seren; Bilgin, Güney Mert; Davut, Kemal; Esen, Ziya; Dericioğlu, Arcan Fehmi (2022-08-01) © 2022 Elsevier B.V.The effect of building direction and post fabrication aging treatment on the microstructure, crystallographic texture and high temperature mechanical properties of Inconel 718 (IN718) alloy fabricated b...
Selective laser melting of Nano-TiN reinforced 17-4 PH stainless steel: Densification, microstructure and mechanical properties Ozsoy, Andac; Aydoğan Güngör, Eda; Dericioğlu, Arcan Fehmi (2022-03-01) In this study, TiN-reinforced 17-4 PH stainless steel was produced by selective laser melting (SLM). It was aimed to utilize nano-sized TiN particles both as inoculants to obtain an equiaxed microstructure in as-built cond...
Wetting behavior and reaction layer formation in C/SiC composite-titanium alloy joints Saltik, Simge; ESEN, ZİYA; Dericioğlu, Arcan Fehmi (2021-09-01) The present study investigates the effect of brazing parameters on reaction layer formation, and mechanical properties of C/SiC composite-Ti6Al4V alloy joints produced by brazing technique. The wetting mechanism of the C/S...

Citation Formats