Kinematic and force analysis of parallel and hybrid manipulators

Download
093355.pdf
2000
Himmetoğlu, Selçuk
Show full item record
149
views
0
downloads
https://hdl.handle.net/11511/2893
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Kinematic and force analyses of overconstrained mechanisms
Üstün, Deniz; Özgören, Mustafa Kemal; Department of Mechanical Engineering (2011)
This thesis comprises a study on the kinematic and force analyses of the overconstrained mechanisms. The scope of the overconstrained mechanisms is too wide and difficult to handle. Therefore, the study is restricted to the planar overconstrained mechanisms. Although the study involves only the planar overconstrained mechanisms, the investigated methods and approaches could be extended to the spatial overconstrained mechanisms as well. In this thesis, kinematic analysis is performed in order to investigate ...
Kinematic and dynamic analysis of robotic manipulators.
Dağ, Bülent; Department of Mechanical Engineering (1987)
Kinematic and dynamic performance of spherical writs and planar wrist manipulators.
Büyüklimanlı, Efe; Department of Mechanical Engineering (1992)
Kinematic and Kinetostatic Analysis of Parallel Manipulators with Emphasis on Position, Motion, and Actuation Singularities
Özgören, Mustafa Kemal (2019-04-01)
This paper provides a contribution to the singularity analysis of the parallel manipulators by introducing the position singularities in addition to the motion and actuation singularities. The motion singularities are associated with the linear velocity mapping between the task and joint spaces. So, they are the singularities of the relevant Jacobian matrices. On the other hand, the position singularities are associated with the nonlinear position mapping between the task and joint spaces. So, they are enco...
Kinematic analysis of a manipulator with its position and velocity related singular configurations
Özgören, Mustafa Kemal (1999-10-01)
Forward and inverse kinematic analyses of a generic 6-R serial manipulator are carried out at both position and velocity levels. Singular configurations associated with the inverse position solution, designated as position related singular configurations (POSCs), and those associated with the inverse velocity solution, designated as velocity related singular configurations (VESOs), are investigated. At POSCs, the specified pose of the hand is not sufficient to determine some of the joint variables; the moti...
Citation Formats
S. Himmetoğlu, “Kinematic and force analysis of parallel and hybrid manipulators,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr