Sezer Özerinç

E-mail

ozerinc@metu.edu.tr

Department

Department of Mechanical Engineering

ORCID

0000-0002-0733-1705

Scopus Author ID

35752517600

Web of Science Researcher ID

P-1276-2017

Effect of nanoheterogeneities on the fracture toughness and tensile ductility of CuTa metallic glass thin films Behboud, Ali B.; Fadaie, Amir; Motallebzadeh, Amir; ŞEHİRLİ, SERVET; Özerinç, Sezer (2024-04-05) Nanoheterogenenous metallic glasses (MG) can offer improved ductility through a nanoscale modulation in their mechanical properties. However, the relationship between the modulation parameters and the mechanical behavior i...
Fracture toughness of AlTiN coatings investigated by nanoindentation and microcantilever bending Kaygusuz, Burçin; Motallebzadeh, Amir; Karadayı, Özcan; Kazmanlı, Muhammet Kürşat; Özerinç, Sezer (2024-02-15) Metal nitride coatings are increasingly used in MEMS applications. The brittle nature of these coatings makes fracture one of the main failure mechanisms during operation. Therefore, quantifying the fracture toughness of n...
Nanomechanical properties of Al-Tb marginal metallic glass Okuyucu, Can; Ulucan, Tolga Han; Abboud, Mohammad; Motallebzadeh, Amir; Özerinç, Sezer; Kalay, İlkay; Kalay, Yunus Eren (2023-11-17) Al-Rare Earth (RE) metallic glasses provide an effective model system to study the effect of nanocrystallites in an amorphous matrix on nanomechanical behavior. In this work, we achieved a series of Al-Tb metallic glass-cr...
Failure behavior of on-site repaired CFRP laminates Sonat, Evren; Bakır, Mete; Özerinç, Sezer (2023-05-01) On-site repairs of carbon fiber reinforced polymer (CFRP) composites involve out-of-autoclave curing, which increases the defect density and reduces the mechanical properties. This work aims to understand the strength and ...
Tunable mechanical properties of thermoplastic foams produced by additive manufacturing Alduais, Abdullah; Özerinç, Sezer (2023-3-01) Fused deposition modeling (FDM) is a versatile additive manufacturing technique for producing polymeric parts. Incorporating a foaming agent into the filament material enables the FDM-printing of thermoplastic foams, which...
Nanoheterogeneous ZrTa metallic glass thin films with high strength and toughness Behboud, Ali B.; Motallebzadeh, Amir; Özerinç, Sezer (2022-04-25) This study investigated the mechanical behavior of ZrxTa1−x (x = 21–79 at%) thin films and nanolayered films of ZrTa with modulated composition as model systems to gain insight into the hardness and toughness of metallic g...
ABS-Fly Ash Composite Filaments for Fused Deposition Modeling Alduais, Abdullah; Kazanç Özerinç, Feyza; Bayram, Göknur; Özerinç, Sezer (2022-01-01) © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Fused deposition modeling (FDM) is one of the most widely used additive manufacturing techniques for the fabrication of polymeric parts. E...
Understanding mechanical failure of graphite rocket nozzle throats under thermal stresses Nigar, Barış; Dönmez, Serhan; Çöker, Demirkan; Özerinç, Sezer (2021-12-01) © 2021 Elsevier Masson SASMechanical failure of graphite nozzle throats is a common problem of rocket engines. The extreme operating conditions constitute the main cause of the problem, resulting in thermal shock-induced c...
Mechanical Characterization of Elastomeric Lattice Parts Produced by Continuous Liquid Interface Production Özerinç, Sezer; Neshani, Roozbeh; Mcgregor, Davis J.; Tawfick, Sameh; King, William P. (2021-11-29)
Microstructure and nanomechanical behavior of sputtered CuNb thin films Abboud, Mohammad; Motallebzadeh, Amir; Duygulu, Özgür; Maaß, Robert; Özerinç, Sezer (2021-09-01) We report on the mechanical properties of Cu–Nb alloys produced by combinatorial magnetron sputtering. Depending on the composition, the microstructure is either fully amorphous (~30–65 at.% Cu), a dispersion of Cu crystal...

Citation Formats