Sinan Turhan Erdoğan

E-mail

sinante@metu.edu.tr

Department

Department of Civil Engineering

ORCID

0000-0003-0769-1249

Scopus Author ID

36095692200

Web of Science Researcher ID

I-4880-2012

Improving the Sustainability of Magnesium Oxalate Cements Using Clay and Calcium Sulfoaluminate Clinker Bilmez, Said Batuhan; Erdoğan, Sinan Turhan (2025-03-01) Magnesium oxalate cement (MgOx) is an alternative binder that forms through the acid-base reaction between dead-burned magnesium oxide (MgO1500) and an acid salt containing oxalate ions. Previously, industrial wastes were ...
Effects of clay type and component fineness on the hydration and properties of limestone calcined clay cement Atasever, Muhammet; Erdoğan, Sinan Turhan (2024-10-01) Limestone calcined clay cement (LC3) is emerging as an alternative to Portland cement, offering economic advantages, reduced CO2 emissions, and mechanical properties on par with Portland cement. Central to the effective ut...
Characterization of Limestone Calcined Clay Cement Made with Calcium Sulfoaluminate Clinker Atasever, Muhammet; Erdoğan, Sinan Turhan (2024-01-01) This study concentrated on producing limestone calcined clay calcium sulfoaluminate cement by replacing portland cement in limestone calcined clay cement with calcium sulfoaluminate cement, with the goal of increasing the ...
Effect of mixture proportioning on the strength and mineralogy of magnesium phosphate cements Bilginer, Baki Aykut; Erdoğan, Sinan Turhan (Elsevier BV, 2021-3) Magnesium potassium phosphate cement (MKPC) has properties advantageous over ordinary portland cement such as quick setting and rapid strength gain. Although the effect of mixture proportioning on MKPC pastes has been stud...
Influence of ground perlite on the hydration and strength development of calcium aluminate cement mortars Şengül, Kemal; Erdoğan, Sinan Turhan (Elsevier BV, 2021-01-10) © 2020 Elsevier LtdCalcium aluminate cement (CAC) concretes are desirable owing to their rapid strength development and resistance to high temperatures, sulfates and acids. They suffer two drawbacks, however, high cost and...
Development of silica fume-based geopolymer foams Shakouri, Sahra; Bayer, Özgür; Erdoğan, Sinan Turhan (Elsevier BV, 2020-11-01) Thermal insulation materials are critical for reducing the energy consumption and carbon emissions associated with buildings. A good insulation material must not only have low density and sufficient mechanical properties b...
Influence of production parameters on calcium sulfoaluminate cements Canbek, Ogulcan; Erdoğan, Sinan Turhan (Elsevier BV, 2020-04-10) The main appeal of calcium sulfoaluminate (C (S) over barA) cements is the possibility of reducing CO2 emissions. C (S) over barA clinkers can generally be produced at lower kiln temperatures and with lower limestone conte...
Laboratory production of calcium sulfoaluminate cements with high industrial waste content Canbek, Ogulcan; Shakouri, Sahra; Erdoğan, Sinan Turhan (Elsevier BV, 2020-02-01) A drawback of conventional calcium sulfoaluminate (CSA) cement production is the use of the costly raw material bauxite as a source of alumina to form the main clinker phase ye'elimite. Replacement of bauxite with industri...
Activation of Blast Furnace Slag with Soda Production Waste Bilginer, Baki Aykut; Erdoğan, Sinan Turhan (American Society of Civil Engineers (ASCE), 2020-01-01) Although the absence of portland cement (PC) in alkali-activated slag (AAS) lowers its carbon footprint, conventional alkaline activators like sodium silicate are expensive and have large environmental impacts. Soda solid ...
Magnesium oxalate cements for carbon reuse Erdoğan, Sinan Turhan (null; 2019-12-09)

Citation Formats