Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Open Access Guideline
Open Access Guideline
Postgraduate Thesis Guideline
Postgraduate Thesis Guideline
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Oxidative dehydrogenation of ethane over chromium-vanadium mixed oxide and chromium oxide catalysts
Date
2007-10-24
Author
Karamullaoglu, Gulsun
Doğu, Timur
Metadata
Show full item record
This work is licensed under a
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License
.
Item Usage Stats
180
views
0
downloads
Cite This
Oxidative dehydrogenation of ethane to ethylene was investigated at temperatures below 500 degrees C over Cr-O and Cr-V-0 oxide'catalysts prepared by the complexation method. The catalysts were characterized by XRD, H-2 TPR, and XPS techniques. The Cr-O catalyst was more active than Cr-V-0 mixed oxide in the selective oxidation of ethane using 02 or CO2 as the oxidant. Cr-O showed activity at temperatures as low as 250 degrees C. TPR results showing easier reduction of Cr-O at much lower temperatures than Cr-V-0 support a correlation between the reducibility and the activity of the catalysts in this reaction. XPS results indicating the reduction of chromium and vanadium species from Cr (6+) to Cr3+ and from V5+ to V4+ (and V3+) support a redox mechanism for this oxidative dehydrogenation reaction. Over Cr-O catalyst, total conversion and ethylene selectivity values of 0. 11 and 0.91 were obtained, respectively, at 250 degrees C for an O-2/C2H6 feed ratio of about 0.33 and at a space time of 0.24 g s/cm(3). With this catalyst, the ethane conversion increased to 0.3, and the ethylene selectivity decreased to about 0.75 when the temperature was increased to 400 degrees C. For both catalysts, higher selectivity values, i.e., above 0.95, were observed when CO2 was used as a mild oxidant instead Of O-2.
Subject Keywords
Selectıve oxıdatıon
,
Elemental sülfür
,
Alumina catalysts
,
Cu-v; propane
,
Isobutane
,
Ethylene
,
H2s; co2
,
Silica
URI
https://hdl.handle.net/11511/30187
Journal
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
DOI
https://doi.org/10.1021/ie0701773
Collections
Graduate School of Natural and Applied Sciences, Article
Suggestions
OpenMETU
Core
Oxidative dehydrogenation of ethane over a monolith coated by molybdenum-vanadium-niobium mixed-oxide catalyst
Karamullaoglu, G; Doğu, Timur (2003-10-01)
Oxidative dehydrogenation of ethane to ethylene was investigated using Mo0.71V0.21N0.08 mixed-oxide catalyst. in powder form and coated over a monolith. At 570degreesC and with a feed stream containing an O-2/C2H6 mole ratio of one. ethylene selectivity value reaching to 96% was obtained Lit a conversion level of about 5% with the monolith-supported catalyst. DRIFTS studies indicated the presence of adsorbed ethoxide species. The proposed reaction scheme for the production of ethylene includes the eliminati...
Adsorption behaviour of shale gas reservoirs
Merey, Sukru; Sınayuç, Çağlar (2018-01-01)
Experimental adsorption measurements for one shale sample were conducted at 25 degrees C, 50 degrees C and 75 degrees C up to 2,000 psia by using pure methane (CH4) and pure carbon dioxide (CO2) to understand the behaviour of CH4 and CO2 adsorption on shales. The effects of temperature and pressure on CH4 and CO2 adsorption on the shale sample were observed. When temperature decreases from 75 degrees C to 25 degrees C, the adsorption capacity increases for both CH4 and CO2 adsorption. As pressure increases,...
Thermal and chemical inactivation of lactococcal bacteriophages
BUZRUL, Sencer; OZTURK, Pinar; Alpas, Hami; AKÇELİK, Mustafa (Elsevier BV, 2007-01-01)
Ten lactococcal bacteriophages in M 17 broth were treated by heat (72 degrees C, 15 min and 90 degrees C, 5 min), ethanol and isopropanol at concentrations of 10%, 50%. 75% and 100% (v/v). The heat treatments were not sufficient to inactivate all the bacteriophages studied whereas ethanol, which was also more efficient biocide than isopropanol, at a concentration of 75% could inactivate all the phages in I min. The 50% and 75% of ethanol were more effective than 100%, which was also observed for isopropanol...
Ethylene and diethyl-ether production by dehydration reaction of ethanol over different heteropolyacid catalysts
Varisli, Dilek; Doğu, Timur; Dogu, Gulsen (2007-09-01)
Dehydration reaction of ethanol was investigated in a temperature range of 140-250 degrees C with three different heteropolyacid catalysts, namely tungstophosphoricacid (TPA), silicotungsticacid (STA) and molybdophosphoricacid (NIPA). Very high ethylene yields over 0.75 obtained at 250 degrees C with TPA was highly promising. At temperatures lower than 180 degrees C the main product was diethyl-ether. Presence of water vapor was shown to cause some decrease of catalyst activity. Results showing that product...
DESULFURIZATION OF BOLU-GOYNUK LIGNITE USING CUPRIC CHLORIDE
OGUZ, M; OLCAY, A (Elsevier BV, 1992-02-01)
Cupric chloride oxidation of Bolu-Goynuk lignite was studied using a four-level factorial design with four process variables: temperature, time. cupric chloride concentration and particle size of the lignite. The main aim was to remove the organic sulphur from the lignite. Maximum organic sulphur removal was achieved by the oxidation of lignite with a particle size of 0.3 mm at 150-degrees-C for 210 min using 50 g CuCl2 per 100 ml of solution.
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
G. Karamullaoglu and T. Doğu, “Oxidative dehydrogenation of ethane over chromium-vanadium mixed oxide and chromium oxide catalysts,”
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
, pp. 7079–7086, 2007, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/30187.