Bond strength and failure analysis of lining materials to denture resin

Date

1999-05-01

Author

Aydin, AK
Terzioglu, H
Akinay, AE
Ulubayram, K
Hasırcı, Nesrin

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

118
views

0
downloads

Objectives: This study was conducted to investigate the bonding properties of five lining materials to a denture base resin. Two hard (chemical-cured resin: Kooliner "Coe Labs, USA" and light-cured VLC resin: Triad "Dentsply, USA") and three soft (chemical-cured resin: Express "Alcos,-USA", heat-temperature vulcanized 'HTV' silicone material: Molloplast-B "Regneri GmbH, Germany" and room-temperature vulcanized 'RTV' silicone material:Ufi Gel-P "Voco,Germany") liners were used.

Subject Keywords

Chemical-Cured Resin, Light-Cured VLC Resin, Light-Cured VLC Resin, Molloplast-B

URI

https://hdl.handle.net/11511/32567

Journal

DENTAL MATERIALS

DOI

https://doi.org/10.1016/s0109-5641(99)00038-x

Collections

Graduate School of Natural and Applied Sciences, Article

Suggestions

OpenMETU
Core

Bond strength of a silicone soft lining material to poly(methyl methacrylate) resin treated with maleic anhydride and its terpolymers Turgut, Mehmet; Bolayir, Giray; Dogan, Orhan Murat; Keskin, Selda; Dogan, Arife; Boztug, Ali (Informa UK Limited, 2007-01-01) This study investigated the effectiveness of surface treatment of Poly (methyl methacrylate) (PMMA) denture base resin on tensile bond strength between PMMA/silicone-based soft liner. A total of 25 specimens were fabricated and assigned into five groups (n = 5). The surfaces of PMMA were treated with maleic anhydride, maleic anhydride-styrene-vinyl-acetate, n-butylmaleate-styrene-vinyl-acetate, or n-pentamaleate-styrene-vinyl-acetate prior to Primo adhesive primer application and silicone liner placement. T...
Dynamic mechanical analysis of provisional resin materials reinforced by metal oxides Korkmaz, T; Doan, A; Usanmaz, Ali (2005-01-01) In this study, several provisional resin materials were investigated by dynamic mechanical analysis (DMA). The materials were autopolymerized PMMA and PEMA, light cured PMMA. Autopolymerized PMMA has the highest T-g (131 degrees C) compared to that of the autopolymerized PEMA (102 degrees C) and light cured PMMA (120 degrees C). The storage moduli for autopolymerized PMMA, autopolymerized PEMA and light cured PMMA are 2.9, 1.8 and 2.3 GPa, respectively. The loss moduli of the same resins are 330, 300 and 35...
Rubber toughening of phenolic resin by using nitrile rubber and amino silane Kaynak, Cevdet (2006-05-01) The aim of this study was to investigate rubber toughening of resol type phenol-formaldehyde resin. For this purpose, phenolic resin was first modified by acrylonitrile butadiene rubber alone, and then by using nitrite rubber together with 3-aminopropyltriethoxysilane. Test specimens were prepared by mixing and casting of liquid phenolic resin in three groups. In the first one, neat phenolic resin specimens were produced. In the second group, phenolic resin was modified with 0.5, 1, 2, and 3 wt% nitrile rub...
Solidification and crystallization behaviour of bulk glass forming alloys Aybar, Sultan; Akdeniz, Mahmut Vedat; Department of Metallurgical and Materials Engineering (2007) The aim of the study was to investigate the crystallization kinetics and solidification behaviour of Fe60Co8Mo5Zr10W2B15 bulk glass forming alloy. The solidification behaviour in near-equilibrium and non-equilibrium cooling conditions was studied. The eutectic and peritectic reactions were found to exist in the solidification sequence of the alloy. The bulk metallic glass formation was achieved by using two methods: quenching from the liquid state and quenching from the semi-state. Scanning electron microsc...
Tensile Bond Strength of a Highly Cross-Linked Denture Tooth to the Compression-Molded and Injection-Molded Denture Base Polymers DOĞAN, ARİFE; Korkmaz, Turan; DOĞAN, ORHAN MURAT; Keskin, Selda; DEMİR, HAKAN (Informa UK Limited, 2009-01-01) This study compared tensile bond strengths between conventional compression-molded heat (HC)-, auto (AP)-, and microwave-polymerized (MC) poly(methyl methacrylate)-based denture resins and a relatively new injection-molded, microwave-polymerized polyurethane based resin (MI) bonded to a highly cross-linked denture tooth. In the first part of the experiments, denture teeth were used as received. In the second part, they were treated with dichloromethane to see its effect on bonding of conventional denture ba...

Citation Formats

A. Aydin, H. Terzioglu, A. Akinay, K. Ulubayram, and N. Hasırcı, “Bond strength and failure analysis of lining materials to denture resin,” DENTAL MATERIALS, pp. 211–218, 1999, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/32567.